REXROTH Filter Original Rexroth BFS 20 H10 * L-F00

REXROTH Filter Original Rexroth BFS 20 H10 * L-F00

The commonly used high-efficiency filters are GB type and GWB type. The filter material is ultrafine glass fiber filter paper with very small pores. Using a very low filtration rate enhances the screening and diffusion effects on small dust particles, resulting in high filtration efficiency. The compressed air coming out of the air source contains excessive water vapor and oil droplets, as well as solid impurities such as rust, sand particles, pipeline sealants, etc. These can damage the piston sealing ring, block the small exhaust holes on the components, shorten the service life of the components or cause them to fail. The function of an air filter is to separate liquid water and liquid oil droplets from compressed air, and filter out dust and solid impurities in the air, but it cannot remove gaseous water and oil.

The design of the filter itself has also made significant progress, with the removal of partition plates being an important aspect, namely the development of non partition filters. The non partition filter not only eliminates the risk of damaging the filter medium with partition plates, but also effectively increases the filtration area, improves the filtration efficiency, and reduces airflow resistance, thereby reducing energy consumption. In addition, air filters have made great progress in high temperature resistance, corrosion resistance, waterproofing, and antibacterial properties, meeting some special needs. The HEPA filter using fine glass fiber filter paper as the filtering medium has a filtration efficiency of up to 99.9998 for particles with a diameter of D.3 microns. Since the 1980s, with the emergence of new testing methods, the improvement of usage evaluation, and the increasing demand for filtration performance, it has been found that HE-PA filters have serious problems, leading to the emergence of higher performance ULPA filters.

REXROTH Filter Original Rexroth BFS 20 H10 * L-F00

Filters used for general ventilation have a wide range of applications, including the microelectronics industry, coating industry, food and beverage industry, and so on. That is to say, filters are just a means to achieve the goal of cleanliness. The large diameter of impurity particles allowed to pass through. The key factor affecting filtration accuracy is the filter element, and different filter elements can be selected according to the needs of subsequent components to achieve the corresponding filtration accuracy. Determine the efficiency of the final air filter, and reasonably select the combination stage and efficiency of each stage of the air filter. If general purification is required indoors, a primary filter can be used; If moderate purification is required indoors, two-stage filters of primary and medium efficiency should be used; If ultra clean purification is required indoors, three levels of purification filtration, namely primary, medium, and high efficiency, should be used, and the efficiency of each level of filter should be matched reasonably and properly. If the efficiency difference between adjacent levels of filters is too large, the previous level of filter cannot protect the next level of filter. The filter, with its bag like structure, ensures that the airflow is evenly filled throughout the entire bag. *The hot melt technology can prevent overcrowding or leakage between bags, reducing resistance and increasing dust holding capacity. The "bag support grille" that serves as a reinforcement can prevent the filter from shrinking or bending in extremely poor environments. F-bag filters can be used in humid, high airflow, and high dust load environments.

Product Features

1. Capture particles of 1-5um dust and various suspended solids.

2. Adopting hot melt technology, the structure is stable and the risk of leakage is reduced.

3. The air volume is high.

4. Low resistance.

5. High dust holding capacity.

6. Can be cleaned and reused repeatedly.

7. Type: Frameless and Framed Bag.

8. Filter material: special non-woven fabric or fiberglass.

9. Efficiency: 60%~95% @ 1~5um (colorimetric method).

10. Operating temperature and humidity: 80 ℃, 80%.

ATOS proportional valve RZMA-030/180/M/7 32

Siemens actuator SKC62

Bornstein limit switch 6087385014

FIAMA FIAMA model FM01-H0200-E01-PU05-R201 comes with a 5-meter cable (including connectors, 5-meter cable, magnetic ring) to replace BTL7-E501-M0200-A-S32+BKS-S32-05

VICKERS coil 300AA0086A AC230 V

IFM laser sensor 01D106

Laser sensor 01D100

TURCK FXDP-IOM88- 0001

BERNSTEIN foot switch 6161000443 F1-UV1Z/UV1ZD

SMC solenoid valve ITV2050-312S3

HYDAC filter cartridge 0110D010ON/- V

Filter cartridge 0110D010BH4HC

Turck proximity switch FCS-G1/2A4-NA

HYDAC filter element 0110D010BH4HC

ASCO solenoid valve VCEFCMG551H401MO 24VDC

Xiangshile 0567010

connector

coupling