Q6918 Steel Structure Shot Blasting Machine

Steel structure shot blasting machineComposition:
1. Cleaning Room
The cleaning room of the steel structure shot blasting machine is a large capacity chamber plate box welding structure, with ZGMn13 wear-resistant protective plate lining the inner wall of the chamber. The cleaning operation is carried out in a sealed chamber.
2. Conveyor roller
The conveyor roller of the steel structure shot blasting machine is divided into indoor conveyor roller and loading and unloading section conveyor roller.
The indoor roller conveyor is covered with a high chromium wear-resistant sheath and a limit ring. The high chromium wear-resistant sheath is used to protect the roller conveyor and withstand bullet strikes. The limit ring can make the workpiece run in the predetermined position to prevent deviation and accidents.
3. Elevator
The hoist of the steel structure shot blasting machine is mainly composed of upper and lower transmission, cylinder, belt, hopper, etc.
The same diameter pulley on the hoist adopts a polygonal structure welded with rib plates, wheel plates, and wheel hubs to enhance friction, avoid slipping, and extend the service life of the belt.
The lifting machine cover is bent and formed, and the cover plate on the lifting machine middle shell can be opened for maintenance and replacement of the hopper and overlapping belt. Opening the cover plate on the lower shell of the elevator can eliminate the blockage of the bottom projectile.
Adjusting the bolts on both sides of the upper shell of the hoist can drive the pull plate to move up and down to maintain the tightness of the lifting belt.
The upper and lower pulleys are equipped with square seat outer spherical ball bearings, which can automatically adjust when subjected to vibration impact and have good sealing performance.
4. Separator
The steel structure shot blasting machine separator adopts square seat outer spherical ball bearings, which can automatically adjust when subjected to vibration impact and have good sealing performance.
5. Maru delivery pipeline
The shot blasting machine for this steel structure has a dual shot control function in the shot blasting pipeline. A gate is installed above each gate to cut off the shot from the separator, making it easy to maintain their respective shot blasting equipment; The opening size of the gate can adjust the flow rate of the projectile, and can also be combined according to the specifications of the cleaning workpiece. The number of gates can be opened and closed to save energy, reduce machine wear, and ensure that production needs are met.
6. Shot blasting machine
Adopting a single disc shot blasting machine, it has become the most advanced shot blasting machine in China today. It mainly consists of a rotating mechanism, impeller, casing, directional sleeve, pellet wheel, and guard plate. The impeller is made of Cr40 material and forged, while the blades, directional sleeve, pellet wheel, and guard plate are all made of high chromium.
7. Blowing device
The steel structure shot blasting machine adopts a high-pressure fan and is equipped with multiple sets of elastic blowing nozzles at different angles in the auxiliary chamber of the chamber to blow and clean the remaining bullets on the surface of the workpiece.
8. Import and export sealing
The sealing device for the inlet and outlet of the workpiece is made of rubber spring steel plate. In order to prevent the projectile from splashing out of the cleaning room during shot blasting, multiple reinforced seals are installed at the inlet and outlet of the workpiece. Its characteristics are strong elasticity, long service life, and excellent sealing effect.
9. Dust removal system
10. Electrical Control
The electrical control system of the steel structure shot blasting machine adopts conventional control to achieve control of the entire machine, using high-quality electrical components produced domestically and internationally, which have the advantages of high reliability and easy maintenance. The main circuit is equipped with small circuit breakers and thermal relays to achieve short circuit, phase loss, and overload protection for each motor. And there are multiple emergency stop switches installed to facilitate emergency shutdown and prevent accidents from escalating. Safety protection switches are installed on the cleaning room and various maintenance doors of the steel structure shot blasting machine. When any maintenance door is opened, the shot blasting wheel of the steel structure shot blasting machine cannot be started. http://www.hbzhan.com/st6871/index.html