Pulse/arbitrary waveform generator

SDG6000X seriesPulse/arbitrary waveform generator

Key Features

• Equal performance dual channel, high output frequency of 500 MHz
• 2.4 GSa/s sampling rate, 16 bit vertical resolution
• Pulse signal with a high frequency of 150 MHz; Adjustable rise/fall time, up to 1 ns
• Output arbitrary waves point by point, with waveform lengths ranging from 2 to 20 Mpts
• Can be used as an IQ signal generator (optional)
• Can be used as a PRBS signal generator
• Can be used as a noise signal generator

Dingyang SDG6000X seriesPulse/arbitrary waveform generatorProduct model

product comparison

Multi in one signal generator

·Continuous waveform generator - frequency up to 500 MHz
·Pulse signal generator - rise/fall time up to 1 ns, low jitter, fine adjustable pulse width and edge
·Function/Arbitrary Waveform Generator -6 standard waveforms and up to 190 built-in arbitrary waveforms
·IQ signal generator - supports baseband and intermediate frequency IQ signals
·PRBS code generator - supports bit rate and adjustable PRBS signals
·Noise signal generator - capable of outputting bandwidth adjustable Gaussian white noise

Innovative EasyPulse technology

When the DDS method outputs square waves/pulses, if the sampling rate and output frequency do not have an integer multiple relationship, it will produce a jitter of one sampling period. The use of EasyPulse technology can overcome this deficiency; Generate low jitter square wave and pulse signals, in addition to the following advantages:

·The pulse frequency can reach 150 MHz
·The rise/fall time can be set separately, up to 1 ns
·Fine adjustable pulse width, as small as 3.2 ns
·Duty cycle as low as 0.001%
·Low jitter

TrueArb waveform technology

Innovative TrueArb technology is used to overcome the jitter and distortion caused by DDS technology. Because TrueArb adopts point by point output technology, no waveform information will be missed. At the same time, there are specific advantages as follows:

·20 Mpts waveform length, finer waveform details
·16 bit vertical resolution for higher signal fidelity
·Combined with the standard EasyWave upper computer software, it can generate and output signals required by customers

vector signal source

The SDG6000X can generate IQ signals of commonly used modulation types such as ASK, FSK, PSK, QAM, etc. It can be used as a baseband source or directly generate orthogonally modulated intermediate frequency signals.

·The carrier frequency can reach 500 MHz
·Symbol rate is 37.5 MSymb/s
·The accompanying EasyIQ upper computer software can generate multiple IQ modulation types

PRBS signal source

·Can provide multiple code outputs of PRBS3~PRBS32
·Multiple logic levels can be preset, such as TTL, LVCMOS, LVPECL, LVDS, etc
·The speed can reach 300 Mbps
·Adjustable rise and fall time

Specifications