Powder granule vacuum feeding machine that meets GMP standards

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

【 Detailed Description 】 Overview of $r $n $r $n Powder Particle Vacuum Feeding Machine: $r $n $r $n Powder Particle Vacuum Feeding Machine meets GMP standards and is mainly used for automatic feeding of V-type mixers, double cone mixers, three-dimensional motion mixers, two-dimensional motion mixers, one-dimensional motion mixers, and square cone mixers. The Tengyang vacuum feeding machine does not require external vacuum or any other lifting equipment to complete the automatic feeding of various mixers. The entire operation process of the powder particle vacuum feeding machine complies with GMP requirements. Data consultation. $r $n $r $n conforms to G

Product Details

Powder granule vacuum feeding machine that meets GMP standards

summary:

Powder granule vacuum feeding machine that meets GMP standardsMainly used for automatic feeding of V-type mixers, double cone mixers, three-dimensional motion mixers, two-dimensional motion mixers, one-dimensional motion mixers, and square cone mixers. Tengyang vacuum feeding machine does not require external vacuum or any other lifting equipment to complete automatic feeding of various mixers,The entire operation process complies with GMP requirements and requires data consultation.

It consists of a mobile rack, vacuum pump, dust recovery cylinder, filter, suction pipe, and electrical control box. All components are centrally mounted on a mobile rack, which has a beautiful appearance and is easy to move.

2、 Main parameters:

Parameters	ZSL-2.0	ZSL-3.0	ZSL-4.0	ZSL-5.0	ZSL - 7
Work pressure (kpa)	<18	<20	<22	<28	<31
Airflow (m)3/h）	210	300	330	370	480
Power (kw)	2.2	3.0	4.0	5.5	7.5
Conveying capacity (kg/h)	800-1600	1200-1800	1500-2000	1800-3000	2400-4000

3、 Brief operation instructions:

1. Make a hole in the cover of the mixer,Ø108 orØ102 orØ 89, weld the randomly brought feeding tee joint onto the hole.

2. Lock the feed three universal quick release clamp onto the mixer cover.

3. Connect the vacuum tube connector on the feeding tee to the feeding connector on the dust collection cylinder of the automatic feeding machine of the mixer using a hose as shown in the takeover process diagram; Use a hose to connect the suction tube on the feeding tee to the stainless steel suction tube.

4. Start the vacuum pump and check that the suction inlet of the stainless steel suction tube is negative pressure air. If the suction tube is vented, the motor will reverse and the power wiring sequence should be changed until the vacuum pump rotates correctly.

5. Start the vacuum pump, insert the suction tube into the material box, and then start feeding. Observe the feeding situation. If there is difficulty in feeding, insert one-third of the inlet slope of the suction tube into the material to be fed, and expose one-third to the air to solve the problem.

6. There is a filter bag in the dust collection cylinder of the feeding machine. In order to prevent the bag from clogging, it is required to manually tap the bag frequently or install a bag tapping device separately. The feeding program of the mixer is: feeding - stop (tapping and cleaning) - feeding, repeated cycle automatically completed. And the feeding time and stopping time can be adjusted. Control the feeding time at the factory or require the installation of a time controller.

7. After the feeding is completed, remove the feeding tee and lock the sealing cover on the joint to mix the materials.

8. If there is a situation where the material cannot be loaded during use, there are generally three situations:

(1) The motor is running in the wrong direction, and the phase sequence of the power supply wiring should be swapped.

(2) If there is air leakage at the mixer or connection, it should be carefully inspected.

(3) The cloth bag is severely clogged and should be replaced or cleaned.