Plastic film, paper plastic composite film, solvent residue gas chromatograph

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Detection of solvent residues in plastic film, paper plastic composite film. This gas chromatograph mainly detects organic compounds, mixtures, such as pesticides, methanol, additives, and other solvent residues

Product Details

detectionPlastic film, paper plastic composite film, solvent residue gas chromatograph

This gas chromatograph mainly detects organic compounds, mixtures, such as pesticide, methanol, additives and other solvent residues

Gas chromatograph for detecting residual solvents in plastic film, paper plastic composite film. Product host

1. Heating zone: * 5-way temperature control (including column box temperature control)

2. Carrier gas control: Setting of 3 pressure gauges (assembled with the selected injector at the factory)

3. Monitor: * Chinese interface setting keyboard and 4.5 '' LCD display, capable of displaying chromatograms

4. Software functions: * Various program functions (stopwatch, ignition, memory, self diagnosis, time program, etc.)

5. Data communication interface: * 1 RS232 interface, 1 RS232 communication cable * 3 analog output structures and signal cables

6. Installation interface: * Optional 3 injectors and 3 detectors

7. Reserve the position for installing gas injection valves and interfaces for use with MS/IR

detectionPlastic film, paper plastic composite film, solvent residue gas chromatographinstrument parameters

Product Model	TST-R-827
Size	250 * 250 * 176 width * depth * height (mm)
Operating temperature	At room temperature, 5 ℃ -400 ℃ (small increments of 1 ℃)
Temperature control accuracy	0.5 % （±0.1℃）
Heating rate	0.1~39 ℃/min can be set arbitrarily (5 ℃~200 ℃ at room temperature) 0.1~20 ℃/min can be set arbitrarily (above 200 ℃)
Large running time	655 min
Program heating large order	9th order
Program heating repeatability	2 %
injection port	1. Column pressure and flow display: pressure gauge display mode 2. Column pressure and flow control: manual mode, controlled by a new type of steady flow valve 3. Operating temperature: 400 ℃ (small increments of 1 ℃) 4. Number of injection ports: 3, including: One filling column injection port: (including test column) One fully passivated quartz glass pseudo column inlet suitable for 530 µ m capillary tube Diaphragm cleaning capillary diversion/non diversion injection port 1: (including SE54, Φ 0.25mmX15m capillary column) Back pressure valve controls column front pressure, manually adjusts diversion ratio