Plastic electroplating sanitary ware bathroom circuit board hardware lock CMI830 electrolytic thickness gauge

Plastic electroplating sanitary ware bathroom circuit board hardware lock CMI830 electrolytic thickness gauge

1. Product UsageMeasurement of Thickness of Electroplated Layer and Potential of Multi Nickel Coating

2. Application areas:Automobiles, motorcycles, bicycles, aerospace and navigation, electronic appliances, circuit boards, hardware locks

Sanitary ware, plastic electroplating, standard parts, neodymium iron boron, technical supervision departments and research institutions.

3. Technical characteristics:

Measurement of plating types: decorative chromium, nickel, copper, zinc, tin, silver, gold, cadmium, hard chromium, chemical nickel, multi-layer nickel,

Composite coatings (such as Cr/Ni/Cu) have about 30 types of coating/substrate combinations. If other coatings need to be measured, they can be requested in advance

Coating substrate: metal, non-metal, neodymium iron boron, etc

Coating layers: single-layer and composite multi-layer

Test dimensions: 2.4mm (B-type test rubber ring), 1.7mm (S-type test rubber ring)

Measurement range: 0.1-35 μ m (thicker coatings can also be measured while ensuring accuracy, but the error will gradually increase)

Plastic electroplating sanitary ware bathroom circuit board hardware lock CMI830 electrolytic thickness gauge

Indication error: ≤± 10%

Resolution: 0.01 μ m for gold and decorative chromium; Other plating types 0.1 μ m

Data processing: Real time display of thickness and potential change curves during the testing process on a computer monitor;

The test results can be saved on the computer and viewed at any time;

Printable test report

Power supply: AC 220V ± 10%, 50/60Hz, 30W

Host size: Same as laptop size

4. Instrument List

1 portable data box for DJH-G electrolytic thickness gauge, 1 installation CD for testing software

1 set of testing rack (including 1 electrolytic cell, 1 large/small rubber ring each), 1 serial connection cable, 4 bottles of electrolyte (120ml), 4 droppers, 1 pipette, 1 cleaning bottle, 1 pair of tweezers, 1 eraser, 1 pack of tissues, 1 instruction manual, 1 warranty card, and 1 certificate of conformity

5．Optional parts:

1 set of laptop computer, laser printer, inkjet printer, wire testing accessories, imported 250ml pipette bottle, imported 250ml suction bottle, imported coating calibration plate, STD-L wire testing rack, STD08 testing rack