Particle structure analyzer

TPF-100 supplied by Zhejiang Top Cloud Agriculture Technology Co., LtdParticle structure analyzerMainly used for soil particle structure analysis, helping users to have a clear understanding of soil fertility. The granular structure is the foundation of fertility, and its relationship with soil fertility is mainly manifested in regulating the contradiction between soil moisture and air; Coordinate the contradiction between the consumption and accumulation of soil nutrients; Stabilize soil temperature; Improving soil fertility is beneficial for the extension of crop roots. The instrument is suitable for laboratory analysis of aggregates in soil, environment, geology, soil erosion, and other fields.

Particle structure analyzerFeatures:
1. Stable performance and low failure rate.
2. No noise, adjustable speed;
3. Equipped with a timer setting function, the running time is displayed on a digital tube, which is concise and clear;
4. Equipped with an emergency pause switch, it facilitates timely power-off and work stoppage in case of abnormalities during testing.

Technical parameters of particle analyzer:
1. Host size: Length 512mm * Width 512mm * Height 760mm
2. Up and down travel: 50 mm
3. Timing range: 0-60 minutes
4. Speed: 1450 revolutions per minute
5. Screening frequency: (adjustable speed) 1-45 times/minute
6. High power: 120W
7. Working voltage: 220V ± 20% 50HZ

Instrument configuration:
1. One soil particle analyzer
2. One oscillation frame
3. 4 stainless steel water buckets
4. 4 sets of sieves, each set including 6 sieves with a diameter of 100 * 49mm (aperture: 5.0mm, 3.0mm, 2.0mm, 1.0mm, 0.5mm, 0.25mm)

Operation steps of soil particle analyzer:
First, place the sieve from small to large and from bottom to top onto the rack, then place the sample on the top and place it in a stainless steel bucket filled with water; Then fix the four sets of hangers onto the vibration frame and tighten the bolts;
Close the leakage protector switch, then turn the timing knob on the analyzer to the desired time, and the pellet analyzer will start working;
The digital monitor displays the running time, and then adjust the speed knob to the desired gear. If there are special circumstances or a need to pause midway, you can press the pause button. If you need to troubleshoot or continue working, you can turn the pause button again to restore the working state.