Particle filtration performance tester

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Overview $r $n $r $n Portable Filter Material Tester. In response to the current situation where most testing instruments in the market are bulky and inconvenient to carry for customers to demonstrate anytime and anywhere, causing manufacturers to be unable to better promote their products, our company has carefully developed this product. This instrument can be used for testing the filtration efficiency of non-woven filter materials, fiberglass filter materials, and meltblown fabric materials. The test data of the product has been compared and tested by large-scale testing equipment, and has a high degree of consistency. The product has been highly recognized by experts from the Cleanliness Association and manufacturers in the filter industry. The system of the product is in accordance with the following standards NIOSH, 42CFR84

Product Details

detailed introduction

XF/SHK-K102 particleFilter performance tester

I. Overview

A portable filter material tester has been carefully developed by our company to test the filtration efficiency of non-woven filter materials, fiberglass filter materials, and meltblown fabric materials, in response to the current situation where most testing instruments in the market are bulky and inconvenient to carry for customers to demonstrate anytime and anywhere, which makes it difficult for manufacturers to better promote their own products. The test data of the product has been compared and tested by large-scale testing equipment, and has a high degree of consistency. The product has been highly recognized by experts from the Cleanliness Association and manufacturers in the filter industry. The system of the product is designed and manufactured according to the following standards: NIOSH, 42CFR84-2005, EN149:2001, GB19083-2010, GB/T2626-2019, YY0469-2011, YY/T0969-2013, and with reference to relevant principles such as EN1822 and IEST-RP-CC021.1.

particleFilter performance tester

2、 Components

1. Particle counter: mainly used to monitor the upstream and downstream particle concentration of the tested filter material, and obtain the efficiency of the tested filter material.

2. Differential pressure sensor: mainly used to test the pressure difference (or resistance) of the tested filter material under a certain test flow rate.

3. Stainless steel fixture: mainly used for compressing and sealing the tested filter material.

4. Imported air pump: mainly used for testing flow rate through filter media, with stable flow rate, green energy saving, and low vibration noise.

5. Control program PLC: circuit control and operation of equipment, program calculation and data processing, stability judgment of upstream concentration, operation control, parameter setting.

IIITechnical Indicators:

particleFilter performance tester
model	XF/SHK-K102
Test efficiency range	20%-99.9%@≥0.3μm
test area	100cm²
Test pressure difference range	0-50pa±1% , 50-500pa±1.5%
Test flow rate of the tested filter material	32L/min± 2.5% (adjustable)
Test Type	Atmospheric dust
Counter sampling flow	2.83L/min ±5%
Particle size display	@≥0.3um，（0.3，0.5，0.7，1.0，2.5，5μm）
Counter laser light source	laser diode
Imported air pump	Continuous work stability
Data memory capacity	1 to 1000 sets of measurement data, which can be exported
screen display	Colorful 7-inch touch screen
Printing method	Built-in Thermal Printer
power supply	Communication 220V/50Hz
power	1kw
Data export interface	USB
environment	Usage environment: 0-40 ℃, relative humidity 10-70%
environment	Storage environment: 0 ℃ to 45 ℃, relative humidity 0 to 70%
Standard Appendix	Thermal printing paper, hose (outer diameter 6mm and 15mm), user manual, test report, certificate of conformity
Overall dimensions	Length 380X Width 320X Height 400mm
material	Shell steel plate baked paint, test component SUS304 stainless steel
weight	30Kg
warranty	1 year

Work environment:

Working temperature: 0-40 ℃
Environmental humidity range: 10-70%, no condensation

3. Machine operating environment: Designed for normal laboratory conditions. If there are super constant dust, corrosive gases, strong electromagnetic fields, or harmful substances in the laboratory or surrounding environment, protective measures must be taken for the testing equipment.

Regularly check whether the connecting wires on the back panel of the controller are in good contact, and if they are loose, they should be tightened in a timely manner. If the machine is not used for a long period of time after the experiment, turn off the power.