PC400 Strong Crusher Manufacturer

PC400 Strong Crusher ManufacturerThe material is crushed by the claw shaped knife on the moving blade disc and the fixed knife on the static blade holder through cutting motion in rotary motion. Very suitable for crushing soft and elastic materials, such as waste plastics, beverage bottles, nylon fabrics, strapping, unsintered gears, etc.

PC400 Strong Crusher ManufacturerPrecautions for use:

1. Before starting, the transmission wheel should be manually moved one or two turns to confirm its flexibility before starting the machine. waitcrusherFeed only after normal operation.

2. Before stopping the operation, the feeding should be stopped and the materials in the machine should be drained before cutting off the power supply of the motor.

3. During operation, it is important to pay attention to the temperature of the bearings, ensure that they maintain good lubrication, and check for any abnormalities in sound and vibration. When abnormal situations are discovered, the vehicle should be stopped to check if it is stuck by non fragile objects or if the machinery is damaged.

4. To maintain uniform feeding of the crusher and prevent overload. Strictly prevent unbreakable objects such as metal and wood from falling into the machine. When unable to break, the moisture content of the feed should not be too high; When wet crushing, it is necessary to maintain an appropriate amount of water to prevent blockage due to insufficient flushing and reduce production capacity.

5. Check if the particle size of the crushed product meets the requirements. If there are too many particles exceeding the specified size, the cause should be identified (such as large gaps in the sieve, wide discharge ports, hammer wear, etc.), and appropriate measures should be takenAppropriate measureseliminate

6. When the crusher is stopped, it is necessary to check whether the fastening bolts are firm and the degree of wear on the parts that are prone to wear. For the tooth crusher, it is also necessary to use the parking opportunity to remove the wood sandwiched between the teeth.

7. Worn parts should be replaced or repaired in a timely manner.

8. The safety device of the crusher should be kept in good condition and must not be invalidated for the sake of convenience.