-
E-mail
roy@wattec.com.cn
-
Phone
13606075103
-
Address
101, 64 Hubin South Sanli, Xiamen City
Product Categories
Xiamen Wotai Technology Co., Ltd
Online multi parameter tester
NegotiableUpdate on 02/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
DIQ/S182 online multi parameter tester, when the number of test points or parameters is less than or equal to 4, or when 1-4 parameters need to be tested at one test point, the 182 system can be given priority consideration.
Product Details
IQ Sensor NetOnline multi parameter monitoring system
Single point multi parameter testing - a wise choice for modern sewage treatment plants
Single point multi parameter testing system182System（1to4Support sensors)
Can be connected1to4Support sensor, suitable for testing points/In situations where there are few testing parameters, such as a pool test4A different parameter. Multiple output signals to choose from, such asRS485, MODBUS, PROFIBUSor0/4-20mAAnalog current output
DIQ/S182Online multi parameter tester
When the test point or test parameter is less than or equal to4Or to test at a testing point1－4When considering parameters, priority can be given to them182System.
l1to4Support sensor
ldigital output
lCan accommodate allIQsensor
lZui is widely available for connection4branchIQsensor
lThe testing parameters are complete,pH/ORPTemperature, dissolved oxygen, conductivity, turbidity, suspended solids concentrationCOD/BOD/TOCAmmonia nitrogen, nitrate nitrogen, etc
lAll sensors are direct input type, with fast response
lCentralized power supply,100－240VACor24VDC
lDigital interface,MODBUS RTUorPROFIBUS DP
lZui Duo5Group simulation current output and6Group relay output
DIQ/S182Performance characteristics of online multi parameter tester:
model |
DIQ/S 182 |
DIQ/S 182 XT |
DIQ/S182 XT-4 |
|
|
|
|
The largest number of sensors |
2 |
2 |
4 |
analog output |
2Group simulation current(0/4-20 mA) 3Group relay |
4Group simulation current(0/4-20 mA) 5Group relay |
5Group simulation current(0/4-20 mA) 6Group relay |
|
digital output PROFIBUS |
DIQ/S 182-PR 3Group relay |
none |
DIQ/S 182 XT-4-PR 3Group relay |
|
digital output MODBUS |
DIQ/S 182-MOD 3Group relay |
none |
DIQ/S 182 XT-4-MOD 3Group relay |
screen display |
Sensor connection and system expansion |
extension module |
|
|
|
|
lCan display two sets of test values simultaneously lCan display the status of output signals |
lauto-confirmationIQSensor and display lCan be connected again1A power module lCan be stacked to form a stack lDistance reachable250rice |
lDIQ/JB: Connect again1branchIQSensors or extended testing points lDIQ/CHVElectromagnetic valve module, automatic cleaning system |
DIQ/S182configuration scheme
example1 |
example2 |
example3 |
|
Model and item number DIQ/S 182 472000 SACIQ-7.0 IQSensor user selection |
Model and item number DIQ/S 182 XT 472001 2XSACIQ-7.0 480042 2branchIQSensor user selection |
Model and item number DIQ/S 182 XT-4 472000 4XSACIQ-7.0 480042 DIQ/JB 472005 4branchIQSensor user selection |
Single channel |
dual-channel | 4通道 |
|
Single test point with analog output
|
Single test point with digital output |
|
Model number Item Number DIQ/S 182 XT-4 472015 3XSACIQ-7.0 480042 VARiON®Plus700 IQ 107066 another2branchIQSensor user selection |
Model number Item Number DIQ/S 182 XT-4-PR 472017 4XSACIQ-7.0 480042 4branchIQSensors User selection |
Analog current output |
Digital signal output |
DIQ/S182Technical Specifications
IQModule List | |||||
goodsnumber |
model |
Functional Description |
power consumption(W) |
IQinterface |
|
1、 Main controller182system | |||||
472000 |
DIQ/S 182 |
182Monitor, can be connected2Support sensor, with2Group module current(0/4-20mA)output sum3Group relay output |
12 |
1 |
|
472001 |
DIQ/S 182 XT |
182Monitor, can be connected2Support sensor, with4Group module current output(0/4-20mA)and5Group relay output |
12 |
3 |
|
472002 |
DIQ/S 182-PR |
182Monitor, can be connected2Support sensor, with3Group relay andPROFIBUS-DPoutput |
12 |
2 |
|
472003 |
DIQ/S 182-MOD |
182Monitor, can be connected2Support sensor, with3Group relay andMODBUS RTU/RS 485output |
12 |
2 |
|
472010 |
DIQ/S 182/24V |
182Monitor, can be connected2Support sensor, with2Group module current(0/4-20mA)output sum3Group relay output |
12 |
1 |
|
472011 |
DIQ/S 182 XT/24V |
182Monitor, can be connected2Support sensor, with4Group module current output(0/4-20mA)and5Group relay output,24Vpower supply |
12 |
3 |
|
472012 |
DIQ/S 182-PR/24V |
182Monitor, can be connected2Support sensor, with3Group relay andPROFIBUS-DPoutput24Vpower supply |
12 |
2 |
|
472013 |
DIQ/S 182-MOD/24V |
182Monitor, can be connected2Support sensor, with3Group relay andMODBUS RTU/RS 485output24Vpower supply |
12 |
2 |
|
472015 |
DIQ/S 182 XT-4 |
182Monitor, can be connected4Support sensor, with5Group module current output(0/4-20mA)and6Group relay output |
12 |
3 |
|
472017 |
DIQ/S 182 XT-4-PR |
182Monitor, can be connected4Support sensor, with3Group relay andPROFIBUS-DPoutput |
12 |
6 |
|
472019 |
DIQ/S 182 XT-4-MOD |
182Monitor, can be connected4Support sensor, with3Group relay andMODBUS RTU/RS 485output24Vpower supply |
12 |
6 |
|
472021 |
DIQ/S 182 XT-4/24V |
182Monitor, can be connected4Support sensor, with5Group module current output(0/4-20mA)and6Group relay output,24Vpower supply |
12 |
3 |
|
472023 |
DIQ/S 182 XT-4-PR/24V |
182Monitor, can be connected4Support sensor, with3Group relay andPROFIBUS-DPoutput24Vpower supply |
12 |
6 |
|
472024 |
DIQ/S 182 XT-4-MOD/24V |
182Monitor, can be connected4Support sensor, with3Group relay andMODBUS RTU/RS 485output24Vpower supply |
12 |
6 |
|
Note: All182The power generated by the system is16.5WThe power consumed by oneself is12WSo the rest is available for othersIQThe power used by the component is4.5W. | |||||
471000 |
MIQ/MC |
MIQController, standard software terminal, can be operated on a computer |
1.5 |
0 |
|
471001 |
MIQ/MC-RS |
MIQController, standard software terminal, can be operated on a computer, withRS232interface |
1.5 |
0 |
|
471002 |
MIQ/MC-PR |
MIQController, standard software terminal, can be operated on a computer, withPROFIBUS-DPinterface |
3 |
0 |
|
471003 |
MIQ/MC-MOD |
MIQController, standard software terminal, can be operated on a computer, withMODBUS RTU/RS485interface |
3 |
0 |
|
471010 |
MIQ/MC-A |
MIQController, standard software terminal, can be operated on a computer, with automatic air pressure compensation function |
1.5 |
0 |
|
471011 |
MIQ/MC-A-RS |
MIQController, standard software terminal, can be operated on a computer, with automatic air pressure compensation function, equipped withRS232interface |
1.5 |
0 |
|
471012 |
MIQ/MC-A-PR |
MIQController, standard software terminal, can be operated on a computer, with automatic air pressure compensation function, equipped withPROFIBUS-DPinterface |
3 |
0 |
|
471013 |
MIQ/MC-A-MOD |
MIQController, standard software terminal, can be operated on a computer, with automatic air pressure compensation function, equipped withMODBUS RTU/RS485interface |
3 |
0 |
|
3、 Power module | |||||
480004 |
MIQ/PS |
Power module, capable of outputting18WThe power,100-240VAC |
+18 |
3 |
|
480006 |
MIQ/24V |
Power module, capable of outputting18WThe power,24VAC/VDC |
+18 |
3 |
|
480021 |
MIQ/Blue PS SET |
Wireless transmission module, when connected100-240VACWhen using alternating current, it can output7WThe power, when connected24VWhen using direct current, it can output24WThe power itself needs to be consumed0.6WThe power of |
0.6 |
3 |
|
4、 Expansion wiring module | |||||
480008 |
MIQ/JB |
Expansion wiring module, used to expand test points |
0.0 |
4 |
|
480010 |
MIQ/JBR |
Expansion wiring module, built-in preamplifier, capable of retransmitting1000Rice, used to expand testing points |
0.2 |
4 |
|
472005 |
DIQ/JB |
182Supporting expansion wiring module, capable of connecting2branchIQsensor |
0.0 |
0 |
|
5、 Output module | |||||
480013 |
MIQ/R6 |
Relay output module,6Group relay output |
1.5 |
2 |
|
480014 |
MIQ/CR3 |
Output module,3Group relay output, threeGroup module current output |
3 |
2 |
|
480015 |
MIQ/C6 |
Current output module,6Group simulation current output |
3 |
2 |
|
480016 |
MIQ/IC2 |
Current input module,2Group current input |
0.2 |
2 |
|
480020 |
MIQ/IF232 |
232interface module |
0.2 |
2 |
|
470004 |
MIQ/PR |
PROFIBUSoutput module |
3 |
2 |
|
470006 |
MIQ/MOD |
MODBUSoutput module |
3 |
2 |
|
470008 |
MIQ/A |
Automatic pressure compensation module(Dissolved oxygen test) |
1.5 |
4 |
|
470011 |
MIQ/A-PR |
Automatic pressure compensation module(Dissolved oxygen test), withPROFIBUSoutput |
3 |
2 |
|
470012 |
MIQ/A-MOD |
Automatic pressure compensation module(Dissolved oxygen test), withMODBUSoutput |
3 |
2 |
|
6、 Cleaning module | |||||
480018 |
MIQ/CHV PLUS |
Valve driven module, used for automatic air blowing |
1.0 |
1 |
|
472007 |
DIQ/CHV |
182Valve driven module, used for automatic air blowing |
0.8 |
0 |
|
Similar Product Recommend
