Oil depot loading and unloading sweeping tank oil and gas mixed transportation cam rotor pump

NegotiableUpdate on 03/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

According to the product name, the cam rotor pump for oil and gas mixed transportation can be seen to have a wide range of applications. The cam rotor pump can not only be used as an oil storage loading and unloading pump, but also as an oil storage cleaning pump because it can rotate forward and backward from the original outlet to the suction port to the outlet. Due to its good anti gasification effect, the cam rotor pump can also be used as an oil and gas mixed transportation pump.

Product Details

Cam rotor pump, oil and gas mixed flow pump, oil depot loading and unloading pump

1Oil depot loading and unloading sweeping tank oil and gas mixed transportation cam rotor pumpProduct Overview

This seriesCam rotor pumpIt mainly belongs to the positive displacement pump, which relies on the rotation of the rotor to achieve periodic changes in the working chamber volume. When the working chamber is connected to the pump suction port, the volume increases, the pressure inside the chamber decreases, and the liquid is sucked in; When the working chamber is connected to the pump pressure outlet, the volume decreases and the pressure inside the chamber increases; The liquid is expelled.

The oil and gas mixed transportation cam rotor pump has advantages over other types of pumps when transporting high viscosity media and oil media.

When conventional self-priming pump products transport high viscosity media, there may be a phenomenon where the discharge flow rate is much smaller than the actual flow rate or cannot be delivered at all. Ordinary self-priming pumps may experience gasification when using and suctioning gasoline and liquids with high gas content, making their self-priming pump performance parameters unable to meet the actual required indicators. Therefore, choosing this series of oil and gas mixed flow pumps and cam rotor pumps is your ideal choice for this working condition.

2、 Main characteristics of oil depot sweeping pump and cam rotor pump

1. The main features of this series of oil tank sweeping pumps and cam rotor pumps are that they can operate without liquid for 20 minutes without damaging the cam rotor pump. During use, the cam rotor pump can rotate in both directions without changing the inlet and outlet pipelines. By simply changing the wiring of the power supply, the pump can switch from the outlet to the suction port to achieve reverse suction. It can be used like a vacuum cleaner to clean the accumulated liquid in the cabin, especially when used with our company's vacuum self-priming device, the self-priming distance can reach about 150 meters.

2. The oil depot sweeping cam rotor pump has high efficiency, with an efficiency of up to 75% -85% within the full working range. Compared with similar volumetric pumps such as screw pumps and gear pumps, the energy-saving efficiency reaches over 35%.
3. The cam rotor pump for oil and gas mixed transportation has strong self-priming ability, with a large self-priming height of up to 9 meters.
4. The viscosity of the conveyed medium can transport various media with viscosity ranging from 1 to 100000 cst. It can transport media from low viscosity to high viscosity, especially for working conditions with high viscosity and high solid content, which other pumps cannot meet.

5. The mechanical seal of the cam rotor pump for oil and gas mixed transportation adopts a modular structure, and the entire mechanical seal is immersed in hydraulic oil in the oil chamber, ensuring that the mechanical seal can rotate freely without damaging it.

IIIOil depot loading and unloading sweeping tank oil and gas mixed transportation cam rotor pumpStructural schematic diagram of cam rotor pump for oil and gas mixed transportation

凸轮转子泵结构图

Schematic diagram of the working principle of cam rotor pump

凸轮转子泵工作原理

4、 Performance parameters of cam rotor pump

model	Flow rate m³/h	Discharge pressure MPa	Speed r/min	High power kW
TLZB25	0.2~5	0.1~0.6	50~960	3
TLZB 40	4~8	0.1~1.0	50~960	5.5
TLZB 50	8~18	0.1~0.8	50~960	5.5
TLZB 65	18~30	0.1~1.2	50~620	37
TLZB 80	25~60	0.1~1.2	50~620	37
TLZB 100	50~100	0.1~1.2	50~620	37
TLZB 125	100~140	0.1~1.2	50~550	75
TLZB 150	140~200	0.1~1.2	50~550	75
TLZB 200	180~250	0.1~1.2	50~550	75
TLZB 200L	220~300	0.1~1.2	50~550	250
TLZB 250	300~450	0.1~1.2	50~550	250
TLZB 300	450~600	0.1~0.8	50~550	250
TLZB 350	600~1200	0.1~0.8	50~500	450

5、 Ordering Instructions for Convex Wheel Rotary Pumps for Oil Depot Loading and Unloading

1. Confirm the viscosity of the medium conveyed by the cam rotor pump, what specific medium it is, and whether it is corrosive. 2. The required flow rate and head of the cam rotor pump. 3. What is the required self-priming height and self-priming distance of the cam rotor pump from the pipeline. 4. It is recommended to install our company's vacuum assist device to extract the required cam rotor pump for working conditions with long distances.