NIVELCO NIVOPRESS N Input Static Pressure Liquid Level Gauge

NegotiableUpdate on 03/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The NIVELCO NIVOPRESS immersion level gauge is suitable for continuous level measurement of clean or contaminated chemical water installed in wells, open channels, and towers. The immersion level gauge can be easily installed in existing tanks, towers, or deep wells, and is particularly suitable for controlling submersible pumps. This two-wire input type liquid level gauge consists of three parts: a special gas conducting cable with a built-in capillary hose, a pressure resistant joint, and a probe. The probe structure of the immersion level gauge is a stainless steel cylinder core with a diaphragm at the bottom and covered by a perforated plastic housing. Liquid level measurement is actually

Product Details

NIVELCO Input type static pressure level gaugeProduct features:
Stainless steel sensor cable with extendable polyurethane shell material
You can choose sensors with heavy anchors, which can be used in liquid environments with fluctuations or rapids
● There is a detachable protective cover that can protect the sensor of the input level gauge from damage and breakage

Input type static pressure level gaugeThe parameters are as follows:

Type NPK NPH
Measurement range: 0, 1, 2, 5... Maximum water depth of 200m
Output: 4-20mA two-wire system 0-10V three wire system
Working voltage: 9-30VDC 18-30VDC
Maximum resistance: Rs= (Us-9V)/0.02A ≥5kΩ
Us= voltage of the power supply
Current: ----<6mA
Full scale accuracy:±0.25%
Deviation: 0.1mA 80mV
Temperature coefficient: 0.1%/10K 0.2%/10K
Working temperature: -10 to+60, can reach+75 for special requirements
Protection level: IP68
Cable cross-section: 0.34mm2
Cable wrapping wire: polyurethane with a diameter of 7mm
Length: up to 300m according to requirements
Probe model: Diameter 22 * 215mm
Weight: Probe: 0.2kg Cable: 0.06kg/m
Component: Sensor: Stainless Steel 316L Probe: Stainless Steel 1.4571
Cable sheath: Polyurethane filling material: VITON
Protect the top hat; ABS