-
E-mail
2217357119@qq.com
-
Phone
15706768339
-
Address
Wenzhou Yueqing Hongqiao Xitang 31
Wenzhou Runguang Lighting Technology Co., Ltd
2217357119@qq.com
15706768339
Wenzhou Yueqing Hongqiao Xitang 31
NFC9100 Anti glare Ceiling Light
One Overview
Suitable for fixed lighting in various indoor and outdoor workplaces, China's coal industry, PetroChina, Sinopec, CNOOC, power, metallurgy, railway, steel, shipbuilding, fire protection, chemical industry, government departments, and large enterprises.
II structural characteristics
Using high-efficiency gas discharge lamps as the light source, and through *'s light distribution design and special processing, the light is soft and uniform, without glare, with an average service life of over 10000 hours.
Adopting high-strength aluminum alloy shell and optimized structural design, it has strong collision and impact resistance.
High tech surface spraying technology, with a protection level of IP65, ensures that the lamp does not corrode or rust in harsh environments.
There are two types of lighting designs, one is symmetrical lighting design and the other is asymmetrical lighting design, which can be selected according to different on-site lighting needs.
The independent cavity structure design has good heat dissipation performance and improves the lifespan of the lamp; Easy to maintain and concise.
Compact structure, beautiful appearance, easy installation, can adopt various installation methods such as embedded and ceiling mounted
III Usage method
① Determine the appropriate installation method based on the on-site environment and lighting requirements. And prepare a corresponding length of 8-10mm three core cable according to the distance of the 220V power supply contact of the lamp.
② Ceiling mounted installation: Use 2 M8 expansion screws to fix on the ceiling or M8 ordinary bolts to fix on the support beam; Embedded installation: Directly fix it in the installation screw holes at the four corners of the lamp using four M6 screws.
③ After installing the bracket, unscrew the locking screws of the lamp chamber and ballast chamber, and open the lamp housing (ceiling mounted, suspended ceiling installation) or ballast housing (screw fixed embedded). Thread the three core cable through the waterproof gland connector and connect it to the terminal block with polarity markings. Attention, please make sure to lock the incoming cable with a crimping clip to prevent it from being pulled out. Embedded ceiling installation method, connect the wires after lifting the lamps and then position the lamps.
④ When replacing the light bulb, first disconnect the power supply, unscrew the screws on the glass panel fixed on the front of the lamp, and use the hanging chain structure to gently hang the panel on the lamp housing. Then, unscrew the old light bulb and replace it with a new one. To replace other electrical components, please open the ballast chamber to replace any electrical component.
4 Main parameters
rated voltage |
AC220/50HZ |
power factor |
Greater than 0.9 |
Protection level |
IP65 |
corrosion resistance grade |
WF2 |
insulation class |
I |
Distance to height ratio |
0.8 |
threaded inlet port |
G3/4 |
Overall dimensions |
300x300x208mm |
weight |
5KG |
Equipped with light source:
Order Number |
Equipped with light source |
rated power |
luminous flux |
Average service life |
NFC9100-J70 |
MH |
70 |
5500 |
10000 |
NFC9100-J100 |
MH |
100 |
9000 |
10000 |
NFC9100-J150 |
MH |
150 |
13000 |
10000 |
NFC9100-N70 |
HPS |
70 |
6000 |
28500 |
NFC9100-N100 |
HPS |
100 |
9600 |
28500 |
Five Precautions
1. Non professionals are not allowed to dismantle lighting fixtures at will.
When in use, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; The center temperature of the transparent component is relatively high and should not be touched directly by hand.
When replacing light bulbs, use bulbs of the same type and power; If the type or power of the light bulb is changed, the matching ballast should be replaced accordingly.
Warning: 1. Do not install directly on combustible materials;
When installing and maintaining lighting fixtures, the power must be disconnected first;
3. The lighting fixtures must be reliably grounded
VI*
The company has passedISO9001:2008Quality system audit and certification, strictly implementedISO9001Production of quality management system standards to ensure product quality meets standards and design requirements,Product implementation7年保用(Light source warranty for one year),From the date of purchase7Within the year, any malfunctions that occur during normal use of the product will be the responsibility of our company for free maintenance.
NFC9100 Ocean King/Anti glare Ceiling Light NFC9100 Ocean King/Anti glare Ceiling Light