Micrometrix flocculant effective control detector

SCM-1Micrometrix flocculant effective control detectorDetailed information:

the United StatesMicrometrixSCM-1 Online Flow Current MonitorFlocculant effective control detector

The Micrometrix online flow current monitor is an independent instrument used to measure the charge in water and wastewater and optimize treatment.

the United StatesMicrometrixSCM-1 includes:

*Integrated SC sensors/detectors

*LED display screen

Product model: SCM-1/SCM-2

SCM-1 Integrated Online Flow Current Meter

SCM-2 Split type Online Flow Current Meter

summary:

The SCM flow current meter from Micrometrix Corporation in the United States continuously measures ion and colloid charges online (commonly used to guide water treatment dosing); The flocculant dosage ensured by SCM is typically applied in drinking water treatment, polymer controlled sludge dewatering, anionic waste detection, optimization of chemical dosage in the wet end of paper machines, and other processes that require flocculant dosage.

advantage

1. Save medicine
2. Maintain water quality
3 Warning Protection
4 Feedback Control
5 Easy to modify
6 Optimization Processing

feature
1 Design
2 digit display
3 MODBUS protocol (optional)
4 Low cost, replaceable sensors
5 replaceable electrodes

the United StatesMicrometrixTechnical Specifications

Measurement principle: Flowing current
Power supply: 110/230VAC
Measurement range: -1000~1000mV
Display mode: Digital LED
Flow rate: 1 gallon (usually)
Hose connection: 3/4 'inverted hook joint
Response time: 1 second
Diagnosis: Sensor LED
Sensor material: Delrin, PTFE
Output: 4-20mA, 0-10V
Communication: MODBUS protocol (optional)
Alarm: High/Low Relay
Zero point adjustment: automatic
Protection level: NEMA 4x
Installation size: 10.94'H x 6.00'W

performance parameters

The SCM flow current meter is mainly used to optimize the water treatment process of adding coagulants, and can continuously monitor and control the amount of coagulants added.

The working power supply is 110VAC or 220VAC. The inlet flow rate of the sensor is 1 gallon per minute, and both the inlet and outlet are quick couplings. The inlet is 1/2 'and the outlet size is 3/4'

The transmitter is packaged in a NEMA 4x non-metallic instrument box with a locking design, suitable for outdoor installation.

SCM has the following control functions:

1) Zero point adjustment

2) Continuous sensor sensitivity adjustment

3) Signal gain adjustment

4) Sensor self diagnostic function, flashing LED indicating operating status

5) Independent high/low alarm point setting value adjustment

6) High/low alarm indicator light

Micrometrix products from the United States

Micrometrix flocculant effective control detector

PO Box 1436

Dacula GA30019

Flowing Current Controller - Model SCC

The Micrometrix flow current controller receives signals from SCM-1 or SCM-2 and outputs a 4-20mA control signal to automatically adjust the chemical feeder and maintain the flow current setting. This controller has a small keyboard and a backlit LCD display screen.

SCC can use an automatic/programmable self-cleaning system that is optional for SCM detectors. The cleaning system controls the automatic valve and keeps the control signal constant during the automatic cleaning cycle.