Magnetoscale probe DK50NR5

NegotiableUpdate on 04/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Magnetoscale probe DK50NR5 measurement range: 50mm $r $n accuracy: 2um $r $n resolution: 0.5um $r $n dustproof Prevent dripping Oil resistant. Good environmental adaptability $r $n High measurement force (DK50PR5) $r $n Low measurement force (DK50NR5): Suitable for soft materials Such as resin; Hard and brittle materials Like glass Lens; Or elastic and easily deformable materials The molded product $r $n can directly output A/B phase signals

Product Details

Magnetoscale probe DK50NR5

Numbers represent probing rules Has environmental tolerance Suitable for installation on various machines

feature
Numbers represent probing rules Has high precision travel Suitable for installation on various machines

Measurement range: 50mm
Accuracy: 2um
Resolution: 0.5um
Dustproof Prevent dripping Oil resistant. Good adaptability to the environment
High measurement force (DK50PR5)
Low measurement force (DK50NR5): suitable for soft materials Such as resin; Hard and brittle materials Like glass Lens; Or elastic and easily deformable materials molded product
Can directly output A/B phase signals

Main specifications
model		DK50NR5	DK50PR5
Type of output signal		A/B/Z three-phase differential signal output (compliant with EIA-422 standard)
Resolution ※ 1		0.5 μm
measurement range		50mm
Accuracy (at 20 ℃)		2 μm
Measure pressure (at 20 ℃)	Upward orientation	-	6.2 N以下
	Horizontal orientation	0.9 ±0.4 N	6.2 N以下
	Downward direction	1.3 ±0.5 N	6.2 N以下
origin		1 point (1mm away from the main axis)
reaction speed		250 m/min
Vibration resistance (10-2000 Hz)		150 m/s2
Impact resistance (11 ms)		1500 m/s2
protection level		IP50	IP64
Temperature range for use		0°C ～ 50°C
Save temperature range		20°C ～ 60°C
power supply voltage		DC +5 V ±5%
Consumption of electricity		1 W以下
Cable length		About 2.5 meters
Appearance diameter		φ20(0～-0.013)mm
Weight ※ 2		Approximately 360 grams
Measuring head		Tungsten steel ball (DZ-122), installation screw M2.5
Output cable length (connected to subsequent electronic devices)		Length 22 meters
Accessories		+PM4 x 5 screws (2 pieces), user manual
If you want to connect the LT30 series, MG series, and LY70 series, you need to set the corresponding resolutions separately. For detailed setting methods, please refer to their respective user manuals. The weight indication does not include the weight of cables and electrical dividers To improve this product, there may be changes to the specifications in terms of functionality and performance. Please confirm our product description without further notice.

Magnetoscale probe DK50NR5