Welcome Customer !

Membership

Help

Pengyi Construction Instrument Factory, Xian County, Hebei Province
Custom manufacturer

Main Products:

mechb2b>Products

Pengyi Construction Instrument Factory, Xian County, Hebei Province

  • E-mail

    1771707726@qq.com

  • Phone

    18031730272

  • Address

    No. 186, Daguozhuang North Industrial Zone, Xian County, Cangzhou City

Contact Now

MH-II Los Angeles Wear Testing Machine comes with a two-year warranty

NegotiableUpdate on 01/23
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

This machine is mainly used to measure the wear rate of stone materials. $r $n $r $nMH-II Los Angeles Wear Testing Machine comes with a two-year warranty. Structure: $r $n $r $n This machine is mainly composed of components such as a cylinder, shelf, sealing cover, gearbox, motor, and counter.

Product Details

MH-II Los Angeles Wear Testing Machine comes with a two-year warrantyTechnical Specifications:

1. Cylinder inner diameter x inner length: 710mm x 510mm (± 5mm)

2. Speed: 30-33 revolutions per minute

3. Working voltage: 380V

4. Counter: 4-digit

5. Dimensions: 1130 × 750 × 1050mm (length × width × height)

6. Steel balls: 8 pieces, 3 pieces, 44.445 pieces

MH-II Los Angeles Wear Testing Machine comes with a two-year warrantyUsage:

1. Before testing, it is necessary to check whether the circuit is intact, press the start button, and whether the drum rotates normally (in the direction of the arrow on the drum, if the rotation direction is opposite, swap the two live wires in the input 380V to change it). At the same time, reset the LED display screen to zero, adjust the preset dip switch to the test frequency, and press the start button to start working. If there are special circumstances, please press the "pause" button to stop the machine from working. After the fault is resolved, press the "pause" button again to restore the machine to work.

2. Load the crushed stones and steel balls for the experiment into the cylinder, seal the cover, tighten the screws, and start the instrument to rotate 500 revolutions before automatically stopping. At this time, the discharge port is in the upper middle position, which is convenient for opening the sealing cover. After opening the cover, press the jog button to turn the discharge port downwards, release the button to stop the test tube, and remove the specimen.

3. Use a 2mm diameter circular hole sieve or a 1.7mm side length square hole sieve to remove the stone chips from the sample, rinse the remaining crushed stones with water, dry and weigh them accurately.


Main products: CA mortar instruments, asphalt testing instruments, concrete, cement testing instruments, geotechnical testing instruments, curing boxes, curing rooms, waterproofing membrane instruments, engineering testing

Models, electronic scales, construction equipment. Among them, CA mortar mixer, CA asphalt mortar mixer, CA mortar air content tester and other products are sold all over the country and highly praised by users.

We adhere to the business principles of prompt delivery, contract compliance, transportation, implementation of three guarantees, and tracking services, and are dedicated to serving our customers..