Low smoke halogen-free flame-retardant cable material extrusion unit price

NegotiableUpdate on 02/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Low smoke halogen-free flame-retardant cable material extrusion unit price configuration 1. Technical specifications and usage conditions: 1. Power supply three-phase five wire system. 380V amp; amp; amp; plusmn; 10%.

Product Details

Low smoke halogen-free flame-retardant cable material extrusion unit priceconfiguration

1、 Technical specifications

1. Power supply three-phase five wire system. 380V ± 10%/three-phase/50Hz

2. The installed capacity is approximately 228kW

3. Cooling circulating water temperature, pressure, and flow rate ≤ 20 ℃, ≥ 0.3Mpa, 3-4m3/h

Environmental conditions:

1. Location: Indoor

2. Electricity: No danger

3. Humidity: 85% without condensation

4. Temperature: 0-30 ℃

Extruder center height: 1000mm

Operation direction: from right to left

2、 Production materials:Low smoke halogen-free flame-retardant cable material

3、 Production requirements:250Kg/hr~400Kg/hr

4、 Unit configuration

Low smoke halogen-free flame-retardant cable material extrusion unit priceFeatures:

1) Plastic and other additives are mixed or plasticized under sealed, pressurized, and temperature controlled conditions, resulting in high production efficiency, uniform material dispersion, excellent quality, pollution-free environment, and convenient material replacement, color change, and cleaning.
2) The rotor shaft, pressure weight and other components adopt a jacket structure, which can be cooled by introducing cooling water when the temperature is too high. The bottom of the mixing chamber is equipped with a copper casting heater to meet the requirements of the plastic refining process, and the quality of the processed materials is excellent and stable.
3) The spiral angle and working length of the rotor ribs are designed reasonably, which can achieve the best kneading effect for the material. The rotor peak is made of wear-resistant hard alloy by welding, and the surfaces of the mixing chamber, rotor, and pressure weight in direct contact with the material are all polished and plated with hard chromium, which is wear-resistant and corrosion-resistant.

4) Add material from the rear door of the rack, and flip the mixing chamber forward 140 ° to unload. This not only facilitates the connection of the production process, but also facilitates the observation and cleaning of the mixing chamber and rotor.
5) The junction between the upper opening of the mixing chamber and the suspended wall of the frame adopts an arc-shaped plate groove labyrinth sealing structure, which has good sealing and dustproof effect. The rotor end face is embedded with tungsten cobalt titanium alloy moving coils in contact with copper filled PTFE sealing rings. It adopts an external pressure non lubricated sealing structure, which is wear-resistant and durable.
6) The flipping mechanism adopts worm gear transmission with high efficiency, large load-bearing capacity, and can achieve non-stop unloading, eliminating frequent motor starting and greatly extending its service life.
7) The electrical control system adopts PLC device, which has complete and reliable automatic control monitoring, alarm and other functions, as well as necessary interlocking protection.
8) The machine is sturdy and durable, with a low failure rate, easy installation, operation, and maintenance, and saves electricity.