Lane traffic signal lights

400mm multifunctional combination three unit lane traffic signal light

Brand: YEQIN

Material: PC

Model: DJD400-33-YQ-RYG-ZS

Specification: 400mm

Technical parameters of lane traffic signal lights

Multiple seals, waterproof

Compliant with GB/14887-2011 and relevant international standards

Red light: LED single brightness: 4360-5250, wavelength: 620-625nm, left and right up and down viewing angles: 30 °, power: ≤ 20W

Yellow light: LED single brightness: 4620-5545, wavelength: 592-594nm, left and right up and down viewing angles: 30 °, power: ≤ 20W

Green light: LED single brightness: 8667-10400, wavelength: 503-506nm, left and right up and down viewing angles: 30 °, power: ≤ 20W.

Environmental temperature: -40 ℃~+80 ℃

Working voltage: AC220V

Lightbox shell material: PC

IP rating: IP53

Visual distance ≥ 300m

Design requirements for lane traffic signal lights:

1. Standard: Complies with GB14887-2003 standard.

2. Appearance design: The appearance is specially designed for LED light sources, with an ultra-thin and user-friendly structure, beautiful appearance, fine craftsmanship, and easy installation in various combinations.

3. Transparent design: The outer surface of the transparent lens adopts an inclined surface design, which is not easy to accumulate dust. Safety traffic signal lights

4. Shell material: the shell is made of die cast aluminum or polycarbonate (PC) materials and silicone rubber seals, which are dust-proof, waterproof, flame retardant, anti-aging and have a long service life.

5. Light source: The light source uses imported four element ultra-high brightness light-emitting diodes (LEDs) with strong brightness, making it easy for people to identify. And it has a long lifespan and good energy-saving effect.

Functions and characteristics of lane traffic signals:

The lens color chip adopts a unique spider mesh secondary light distribution design to ensure even illumination of the signal light.

The light transmittance is high, and the light spot meets the chromaticity standard. The circuit design adopts a mesh design to make the signal light emit uniformly.

The light source adopts high brightness LED.

Customizable dimming function.

The lifespan of the entire lamp exceeds ten years, with resistance to vibration and wind pressure exceeding 145km/h.

Double sealed, shell protection level: 1P55.

The product has been tested by the Traffic Safety Product Quality Supervision and Testing Center of the Ministry of Public Security and meets the requirements of the People's Republic of China

Requirements for national road traffic signal lights GB14887-2011.

The product has passed CE, TUV, and EN2368 certifications.

Our company uses ultra bright LED light-emitting diodes. The whole lamp is composed of three connected round cake lamps, plus a yellow countdown unit. The diameter of the light-emitting unit is 400 millimeters.

LED traffic signal features:

The lamp body is made of high-quality aluminum ingots melted and then die cast in one go.

Ultra thin design, lightweight.

The color palette is injection molded with PC, which is beautiful and elegant.

Under scorching sun and heavy fog conditions, it exhibits its outstanding advantages.

The appearance adopts a square shell, square lampshade, transparent fiberglass color, average brightness, wide field of view, and strong transparency.

Scope of application: This lamp is suitable for bicycle lanes.

☆ Compliant with GB14887-2011 Chinese National Standard Product Certification

☆ Imported high-efficiency LED signal lights with low power consumption and long lifespan

☆ Transparent PC face mask, high transmittance, flame retardant, and UV resistant

☆ Match all domestic signal control manufacturers' signal equipment access

☆ A bid control plan with technical advantages that meets the bidding requirements

☆ We can design the plan according to your requirements

Complies with the technical specifications in the GB14887-2011 standard of the People's Republic of China;

Each LED tube has a protective circuit, and damage to a single light-emitting tube does not affect the overall electrical performance of the lamp.

It consists of three parts: red motor vehicle luminous unit, yellow motor vehicle luminous unit, and red motor vehicle luminous unit

Product features:

☆ Low power consumption

☆ Novel structure and beautiful appearance

☆ Large perspective

☆ Long lifespan

☆ Multiple sealing, waterproof

☆ Unique optical system, uniform chromaticity

☆ Long visible distance

☆ Complies with GB/14887-2011 and relevant international standards

Motor vehicle signal lights

DESCRIPTION

Full screen signal light, single screen display of red full screen, yellow full screen, and green full screen signals.

Product Features

All indicators comply with the GB14887-2011 "Road Traffic Signal Lights" standard of the People's Republic of China

Imported four element ultra high brightness LED wick, uniform chromaticity, large viewing angle, long visible distance, and long service life.

Using silicone rubber seals, it is dustproof, waterproof, and flame-retardant, effectively eliminating various hidden dangers. Lane traffic signal control lights