Laboratory hanging tank flotation machine

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The XFD flotation machine is mainly used for flotation of small amounts of ore samples in industrial experiments such as coal power, electricity, mining, geology, chemistry, metallurgy, building materials, and chemical engineering. $r $n The single cell flotation machine is driven by the triangle generation drive of the motor to drive the impeller to rotate, generating centrifugal action to form negative pressure. On the one hand, it absorbs sufficient air to mix with the pulp, on the other hand, it stirs the pulp to mix with drugs, and at the same time, it refines the foam so that the minerals adhere to the foam and float to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper. Manufacturers produce small-scale mining hanging groove flotation machines for university laboratories and laboratory hanging groove flotation machines

Product Details

Laboratory hanging tank flotation machineScope of use:
The XFD flotation machine is mainly used for flotation of small amounts of ore samples in industrial experiments such as coal power, electricity, mining, geology, chemistry, metallurgy, building materials, and chemical engineering.
The single cell flotation machine is driven by a triangular drive of an electric motor to rotate the impeller, generating centrifugal force to form negative pressure. On the one hand, sufficient air is sucked in to mix with the slurry, and on the other hand, the slurry is stirred with the medicine The mineral is mixed, and the foam is refined at the same time, so that the mineral is bonded to the foam and floated to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper.

Laboratory hanging tank flotation machinemaintenance and upkeep

1. During the use of the flotation machine, lubricating oil should be added to each rotating joint, and lubricating oil should be replaced regularly at the rolling bearings.

2. The flotation cell can operate normally at 15 ℃ -50 ℃.

3. When transporting the flotation machine, the focus should be on the frame and not on any component to prevent damage.

Technical characteristics of hanging groove flotation machine

serial number	project		unit	Model number
				XFG5-35 type	XFG50-100 model
1	Floatation tank specifications		gram	5,15,25,35	50,100
2	Flotation tank capacity		milliliter	20,60 100,140	200,400
3	impeller diameter		millimeter	φ20,φ26, φ26,φ30	φ36,φ48
4	impeller speed		r	1000-1850
5	Feed ore size		millimeter	0.05-0.20
6	electricity move machine	model	/	YTC-180-4/125	YTC-180-4/125
		power	tile	220	220
7	Overall dimensions		millimeter	400×280×600	400×280×650

Operation of Hanging Cell Flotation Machine

Grind the ore sample to the required particle size and mix it with water. Pour it into the groove, rotate the spindle by hand, and confirm whether the position of the selection groove on the frame is correct. Then fix it on the frame.

Determine the flotation speed, switch on the power supply, drive the main shaft and impeller to rotate clockwise through the belt pulley drive, mix in the tank, add necessary reagents, and then mineralized foam can be formed. After scraping out with a scraper, the required minerals can be obtained.