-
E-mail
3385004602@qq.com
-
Phone
13775203898
- Address
Product Categories
Changzhou Jiafa Granulation Drying Equipment Co., Ltd
LDP fluidized bed coating machine
NegotiableUpdate on 01/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
General of applications ★ Fluidized bed coating machine is a new type of particle coating equipment that organically combines fluidization coating technology and spray technology. It is widely used for film slow and controlled release, skeleton slow and controlled release capsules, pill coating, particles, powder coating
Product Details
Application Overview General of Applications
★ Fluidized bed coating machine is a new type of particle coating equipment that organically combines fluidization coating technology and spray technology, and is widely used for film slow and controlled release, skeleton slow and controlled release capsule, pill coating, particle and powder coating.
★ Fluid-bed coater is a new style coating equipment that combined fluid-bed spraying technology and coating well. It is widely used for film slow and control releasing coating, framework slow and control releasing capsule, pellet coating, granule, powder coating, etc.
Features of Equipment
★ Bottom jet state transformation, the material has a certain regular running trajectory, thus obtaining uniform and continuous coating film.
★ Powder, granule, pill masking, moisture-proof, anti-oxidation, waterproof, heat-resistant, color isolation and other coatings.
★ No loss of coating materials and low production costs.
★ The route of fog particles arriving at the material is short, and there is no danger of "spray drying".
★ Cylindrical acceleration container or inverted cone deceleration design, capable of coating particles, large particles, small particles, and pellets.
★ Material dispersibility, no adhesion phenomenon.
★ Coating of bottom spraying, material flow in order. We can get uniform and continuous film.
★ Taste masking odor, moisture-proof, antioxidation, prevent water, heat insulation, coloration and separation coating.
★ Low productive cost, and the coating material is used perfectly.
★ Short travel distance of fog granule and without the problem of “spray drying”.
★ The design of cylinder for accelerator or cone for decelerate can be used for coating of granule, powder and pellets.
★ The high separate, without adhere.
Project LTEM Specification |
5 |
15 |
30 |
60 |
120 |
200 |
300-800 | ||
|
feeding amount Capacity |
Kg/batch kg/batch |
4-6 |
10-20 |
25-40 |
40-80 |
80-150 |
150-250 |
Design according to user requirements By client |
|
|
Raw material container capacity Container volume |
L |
15 |
50 |
100 |
220 |
360 |
650 |
||
|
fan power Power of fan |
Kw |
4 |
5.5 |
7.5 |
15 |
18.5 |
22 |
||
|
compressed air Compressed air |
pressure Pressure |
Mpa |
0.6 |
||||||
|
consumption Consumption |
m3/min |
0.4 |
0.6 |
0.9 |
1.3 |
1.8 |
2.4 |
||
|
steam Steam |
pressure Pressure |
Mpa |
0.4-0.6 |
||||||
|
consumption Consumption |
Kg/h |
9Kw |
64 |
85 |
181 |
250 |
330 |
||
|
host size Size of installation for reference |
H1(mm) |
2600 |
2850 |
3150 |
3250 |
3500 |
3800 |
||
H2(mm) |
|
340 |
490 |
590 |
790 |
890 |
|||
H3(mm) |
|
2630 |
2930 |
3020 |
3280 |
3580 |
|||
B1(mm) |
1010 |
1160 |
1460 |
1660 |
2060 |
2260 |
|||
B2(mm) |
1560 |
1860 |
2460 |
2860 |
3660 |
4060 |
|||
Ø1(mm) |
550 |
700 |
1000 |
1200 |
1600 |
1800 |
|||
Ø2(mm) |
180 |
250 |
250 |
280 |
280 |
315 |
|||
L(mm) |
850 |
1550 |
1700 |
1800 |
2000 |
2100 |
|||
All parameters are for reference only. Depending on the material situation, our company reserves the right to make changes without prior notice.
All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!
Similar Product Recommend
