Kunshan Copper Plating Gold Thickness Gauge Thick800a

nickel plating

The method of depositing a layer of nickel on a metal or some non-metal by electrolysis or chemical methods is called nickel plating. Nickel plating can be divided into electroplated nickel plating and electroless nickel plating. Electroplated nickel plating is a process of depositing a uniform and dense nickel coating on the cathode (plated part) in an electrolyte composed of nickel salt (referred to as the main salt), conductive salt, pH buffer, and wetting agent. The anode is made of metallic nickel, and the cathode is the plated part. Direct current is applied to deposit the coating on the cathode (plated part). Bright nickel is obtained from the plating solution with added brightener, while dark nickel is obtained from the electrolyte without added brightener.

gilding

Gold plating can be divided into two types: one is homogeneous material gold plating, and the other is heterogeneous material gold plating

Homogeneous material gold plating refers to the process of gilding the surface of gold jewelry. Its significance is to improve the brightness and color of jewelry. Heterogeneous material gold plating refers to the process of gold plating on the surface of non gold materials, such as silver gold plating and copper gold plating. Its significance is to replace the color of the plated material with the luster of gold, thereby improving the ornamental effect of jewelry.

In addition, gold plating can be divided into two main categories based on the characteristics of the plated parts:

1. Gold plating on metal parts

2. Gold plating on non-metallic parts

So there are two corresponding categories of gold plating waste according to the characteristics of the plated parts:

1. Gold plating waste of metal parts

2. Non metallic gold plating waste

Non metallic gold plating includes gold plating on glass, gold plating on plastic, gold plating on ceramics, etc., because the gold on their waste is easy to recycle. The technical issues of recovering gold from metal piece gold plating waste can be classified Metal piece gold plating waste, later referred to as gold plating waste,

Product Introduction

Copper plated nickel gold thickness gauge is a type of non-destructive plating layer testing instrument, mainly used to test nickel and gold plating layers, as well as metal layer thicknesses such as zinc plating, tin plating, titanium plating, copper plating, rhodium plating, palladium plating, silver plating, etc. Tianrui Instrument is a professional manufacturer of copper plated nickel gold thickness gauges and a listed analytical instrument company.

Performance Characteristics

Meet the testing needs of samples with different thicknesses and irregular surfaces

A small hole collimator with a diameter of 0.1mm can meet the needs of small testing points

High precision mobile platform can locate test points with a repeat positioning accuracy of less than 0.005mm

Using height positioning laser, it can automatically locate the testing height

Positioning laser determines the positioning spot, ensuring that the test point is aligned with the spot

The mouse can control the mobile platform, and the position clicked by the mouse is the measured point

High resolution probes make analysis results more accurate

Good radiation shielding effect

Test port high sensitivity sensor protection

Standard Configuration

Open style product cavity.

The precision two-dimensional moving sample platform allows the detector and X-ray tube to move up and down, achieving three-dimensional movement.

Dual laser positioning device.

Lead glass shielding cover.

Si Pin detector.

Signal detection electronic circuit.

High and low voltage power supply.

X-ray tube.

height sensor

protect the sensor

Computers and inkjet printers

technical indicators

Model: Thick 800A Copper Plating Gold Thickness Gauge

The range of elemental analysis ranges from sulfur (S) to uranium (U).

At the same time, it can analyze more than 30 elements and five layers of coating.

The analysis content is generally between ppm and 99.9%.

The coating thickness is generally within 50 μ m (varies for each material)

Any number of selectable analysis and recognition models.

A mutually independent matrix effect correction model.

Multivariate Nonlinear Recycling Program

The temperature adaptation range is from 15 ℃ to 30 ℃.

Power supply: AC 220V ± 5V, it is recommended to configure an AC purification stabilized power supply.

Exterior dimensions: 576 (W) × 495 (D) × 545 (H) mm

Sample Room Size: 500 (W) × 350 (D) × 140 (H) mm

Weight: 90kg