-
E-mail
akiyama_huang@163.com
-
Phone
18875910180
-
Address
Room 307, Hongye Maker Building, Shanzuitou, Longhua Street, Shenzhen, Guangdong Province
Product Categories
Shenzhen Qiushan Trading Co., Ltd
Japanese AE MIC wiring harness inspector
NegotiableUpdate on 01/23
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Japanese AE MIC harness checker $r $n is equipped with two types of modes. $r $n Check Mode: Perform comparative checks using saved connection states. $r $n search mode: displays the pin number contacted by the probe.
Product Details
Japanese AE MIC wiring harness inspector
- Up to 30 connection status modes can be saved.
- Simply connect the main wire harness and load it to easily operate.
- Simple and intuitive operation. Anyone can easily check the wiring harness.
- The compact and lightweight design allows it to be installed anywhere.
- Mobile batteries can also be used for on-site inspections.
| pattern | Check (automatic)/Search (manual search for needle number) |
|---|---|
| Check the number of needles | 100 needles |
| Physical Memory | Wire harness data can store 30 patterns (non-volatile memory) |
| check the joint | MIL 50 needles x 2 |
| display | 20 digit x 4-line backlit LCD display screen Judging the quality of LED (green/red) |
| operating unit | Left and right cursor keys/ESC key/START key |
| buzzer | NG notification |
| input | Pin search probe chip socket x 1 External control connector x 1 |
| Need power supply | DC5V (including AC adapter), compatible with commercially available mobile batteries |
| Overall dimensions | 260 (W) x 65 (H) x 180 (D) excluding protrusions such as feet. |
| weight | About 1.1kg |
| external control | External input (start/stop) |
|---|---|
| External output (judging whether the output signal is good/bad/measurement end signal) | |
| option | Can manufacture customized fixtures and terminal blocks (consultation required) |
| Conducting OK judgment | Apply a voltage of DC5V and determine if the voltage is above DC2.0V (terminal level) |
|---|---|
| Continuity NG judgment | Apply a voltage of DC5V and determine if the voltage is below DC0.8V (terminal level) |
*Specifications are subject to change without prior notice.
- Up to 30 connection status modes can be saved.
- Simply connect the main wire harness and load it to easily operate.
- Simple and intuitive operation. Anyone can easily check the wiring harness.
- The compact and lightweight design allows it to be installed anywhere.
- Mobile batteries can also be used for on-site inspections.
| pattern | Check (automatic)/Search (manual search for needle number) |
|---|---|
| Check the number of needles | 100 needles |
| Physical Memory | Wire harness data can store 30 patterns (non-volatile memory) |
| check the joint | MIL 50 needles x 2 |
| display | 20 digit x 4-line backlit LCD display screen Judging the quality of LED (green/red) |
| operating unit | Left and right cursor keys/ESC key/START key |
| buzzer | NG notification |
| input | Pin search probe chip socket x 1 External control connector x 1 |
| Need power supply | DC5V (including AC adapter), compatible with commercially available mobile batteries |
| Overall dimensions | 260 (W) x 65 (H) x 180 (D) excluding protrusions such as feet. |
| weight | About 1.1kg |
| external control | External input (start/stop) |
|---|---|
| External output (judging whether the output signal is good/bad/measurement end signal) | |
| option | Can manufacture customized fixtures and terminal blocks (consultation required) |
| Conducting OK judgment | Apply a voltage of DC5V and determine if the voltage is above DC2.0V (terminal level) |
|---|---|
| Continuity NG judgment | Apply a voltage of DC5V and determine if the voltage is below DC0.8V (terminal level) |
*Specifications are subject to change without prior notice.
Japanese AE MIC wiring harness inspector
Similar Product Recommend
