Isolation Air Monitoring System MAS-100 Iso MH;

Isolator air monitoring system
MAS-100 Iso MH?

MAS-100 Iso MH? The design purpose is to monitor air microorganisms in the isolator
Material pollution. *The safety design allows for the installation of multiple critical control points
Sampling head (connected to a standard 90-100 mm Petri dish), while
Both electronic and moving parts are located outside of critical areas. MAS-100 Iso
MH? Has an additional internal pump with flow control for the sampling head
Automatic disinfection of sampling tubes. Innovative dual valve system capable of sampling heads
Integrate into the purification process of the isolator. To avoid blind spots, change from scratch 1
When it is the first 2, suction will continue, and so on. Each unit has one
One air pump and one purification pump, and * automated. MAS-100 Iso
MH? Is manufactured according to GAMP 5 and complies with ISO 14698 standard. the system
The design meets the highest standard requirements and has been thoroughly validated.

Functional principle

MAS-100 Iso MH? It is a high-performance instrument based on the Anderson collision principle.
It directs the airflow into a standard Petri dish containing agar medium. Complete one
After a collection cycle, culture the Petri dishes and count the bacterial colonies.

Important features and advantages

For any length of tube, H2O2 purification can be performed
Fully meet the requirements of d50 value
Ethernet or Probus interface, easier to install than 4 single head samplers
Sampling flow rate: 100 LPM (automatic adjustment, flow sensor)
1m3 can be collected in 10 minutes
Collision speed: 20 m/s
Sampling head, 300 0.6 mm holes
Stainless steel or aluminum sampling head
compact footprint
Less power wiring
Less computer cable wiring
Low power consumption

advantage

Each head can be equipped with a filter (opticap 4)
Inches and 5 inches) to prevent cross contamination
Sampling principle and efficiency compared to all others
MAS-100? Same instrument