Instructions for using waterproof tape for steel structures

Instructions for using waterproof tape for steel structures

Scope of application: 1. Waterproof engineering and waterproofing and moisture-proof of roofs, walls, basements, bathrooms, etc. in industrial and civil buildings; 2. Waterproofing of buildings such as bridges, roads, parking lots, swimming pools, and reservoirs; 3. Suitable for buildings with structural deformation and in cold regions; Protection, wrapping, and moisture proofing of pipelines and anti-corrosion coatings.
Hot melt method, cold bonding method, and hot cold bonding roll material can be separately constructed using hot melt method or cold bonding method, or hot cold bonding method can be used for large-area cold bonding, and hot melt method can be used for construction at the lap joint area. 1. Hot melt method: Use flame spray or spray lamp to evenly heat the bottom surface and base layer of the coil. When the surface asphalt begins to melt and becomes black and shiny, lay the coil while baking, and compact it with a pressure roller.
At the same time, attention should be paid to adjusting the flame size and speed to maintain the asphalt temperature between 200-2500C.

Butyl tapeIt is an environmentally friendly solvent-free sealing adhesive material produced by blending main raw materials such as butyl rubber and polyisobutene, using a special production formula and Xin technology, and selecting high-quality special polymer materials (imported) through a special process flow
Written by Xinda butyl waterproof sealing tape manufacturer, if it needs to be specified
Butyl tape is used as a supporting material for waterproofing membrane bonding, metal profiled board bonding, PC board bonding, and other sealing and waterproofing projects for civil structure roofs and metal panel surfaces
Grid aluminum waterproof butyl tapePurchase high-quality waterproof products with single-sided non-woven fabric and hire a professional construction team to do it. This will naturally reduce many risks, but it cannot be achieved without leakage
Instructions for using waterproof tape for steel structures

Butyl tapeWaterproof sealing and chemical corrosion resistance, butyl tape supplier, strong UV (sunlight) resistance; A service life of over 20 years


Reduce the stress caused by changes in temperature and heat, resulting in water leakage at the connection points

At the same time, attention should be paid to adjusting the flame size and speed to maintain the asphalt temperature between 200-2500C
Mesh aluminum foil butyl sealing tape
3. Air tightness, waterproofing, and shock absorption at the joints of colored profiled sheets, and air tightness, waterproofing, and shock absorption at the joints of polycarbonate sheet engineering
Used in conjunction with kraft paper tape; Suitable for use on the edges of paint engineering or other ordinary paints; Covering the non electroplated parts of the electroplated parts used for precision electroplating; High temperature can reach 280 degrees, medium temperature can reach 80-130 degrees
Where is the manufacturer of butyl tape

Product features: 1. Strong impermeability. 2. High tensile strength, large elongation, good dimensional performance, strong adaptability to base shrinkage deformation and cracking. 3. Good high and low temperature resistance. S is suitable for building waterproofing in lower temperature environments, while APP is suitable for building waterproofing in higher temperature environments. 4. 5. It has good resistance to breakage, tearing, corrosion, mold, and weathering. 5. It is easy to construct and can be operated all year round using the hot melt method. The joints are reliable.

Waterproof sealing adhesive tape is made by blending main raw materials such as butyl rubber and polyisobutene. According to a special production formula, using Xin technology, high-quality special polymer materials (imported) are selected, and environmentally friendly solvent-free sealing adhesive materials are produced through a special process flow
Written by Xinda butyl waterproof sealing tape manufacturer, if it needs to be specified
The moisture content requirement is below 9%. Apply S modified asphalt waterproofing membrane cold base oil evenly on the dry base, and dry for 6 hours
2. Sealing and Waterproofing Treatment of Construction Joints in Subway Tunnel Structures in Municipal Engineering
4. Usage requirements: (1) The bonding surface should be clean and free of oil, dust, water vapor, etc