Industrial dust detector

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Industrial dust detector is an instrument for real-time online monitoring of dust concentration, which can be used to monitor whether the bag of the dust collector is damaged or leaking, and the dust content of each box. It can also be used to monitor the concentration of smoke and dust in dust removal pipelines, chimney flues, gas pipelines, etc; It can accurately monitor the emission of dust or reduce the loss of useful powder, achieve the goal of protecting the normal operation of main equipment or reducing product economic losses, and effectively grasp the operation status of each bag filter box and the dust emission situation of flue pipes.

Product Details

Industrial dust detectorCan be used to monitor whether the bag of the dust collector is damaged or leaking, and to detect the dust content of each box in real-timeOnline monitoring of dust concentrationThe instrument can also be used to monitor the concentration of smoke and dust in dust removal pipelines, chimney flues, gas pipelines, etc; It can accurately monitor the emission of dust or reduce the loss of useful powder, achieve the goal of protecting the normal operation of main equipment or reducing product economic losses, and effectively grasp the operation status of each bag filter box and the dust emission situation of flue pipes.

Technical Requirements:

displayway	On site on-sitedisplay
ambient temperature	-40-80 ℃ (electronic components)
ambient humidity	45%～95%RH
Measure pressure	≤2.5MPa
measure temperature	-50-260 ℃ (standard type)（Customization is required for high temperatures, please confirm in advance
pipeline pressure	-0.1 ～2.5MPa
pipe diameter	0.1 meters to 4 meters
gas flow rate	1m/s～50m/s
dust particles	Nominal diameter 0.1µm～200µm
measurement accuracy	Full range ± 2.5%
measurement range	0-50/100/200/500/1000/10000mg/m³ （A large number of programs can be customized）
Insert length	500mm/800mm(Standard type),Special dimensions can be determined according to the on-site pipe diameterSystem.
output method	DC4－20mA
power supply voltage	DC24V
wiring method	Two line system, non-polar exemptionOpen lid wiring
connection method	M27 × 2 stainless steel mounting base
Protection level	IP65/NEMA4 aluminum alloy housing, suitable for installation in non corrosive environments, special material probe
grounding resistance	<4Ω
Transmitter power consumption	Less than 1W