Hybrid polymer special anti-corrosion coating for chimney anti-corrosion construction

Hybrid polymer special anti-corrosion coating for chimney anti-corrosion construction

Hybrid polymer special anti-corrosion coating for chimney anti-corrosion construction

Hybrid polymer anti-corrosion coating is a high-performance anti-corrosion coating that is a product of the development of the times. The anti-corrosion coatings used for glass flake coating and chimney anti-corrosion can no longer meet the anti-corrosion needs of manufacturers. A high-energy, non shedding, and more durable material has emerged in response to the trend of historical development. The United States has already invented and put it into use, and China has followed suit and introduced it for use in anti-corrosion applications in power plants and other fields. Langfang Wanteng Anti corrosion Co., Ltd. is currently the first domestic manufacturer to introduce technology and start producing hybrid polymer anti-corrosion coatings. And it began production and use in August 2017, and its test results proved that the advantages of hybrid polymer special coatings are indeed better and significantly better than glass flake effects. Whether it is bonded with steel structures, bricks, or concrete, it can bond well and is not easy to peel off. The anti-corrosion performance is even better.
Construction method of polymer anti-corrosion coating: First, remove the old lining on the inner wall of the chimney, repair and level the inner wall of the chimney with polymer mortar, spray a primer, and then spray hybrid polymer material for anti-corrosion.
Advantages: It is corrosion-resistant and has a service life of up to 10 years.
Disadvantage: Slightly high cost! General factory units can reluctantly accept it.

Good adhesion, no peeling or detachment, good anti-corrosion performance. According to the GB/T9286-89 testing standard, the adhesion is rated as level 1. Solid content: Solid content is a guaranteed item for various coatings. The amount of solid content is directly related to the thickness of the paint film, consumption quota, and economic benefits. According to the GB/T1725-89 testing method, three types of coatings are specified. Drying time of smoke anti-corrosion coating: Referring to other enterprise standards, according to the GB/T1728-89 standard, the surface drying time is ≤ 4h, and the actual impact strength of smoke anti-corrosion coating: Impact strength measures the impact resistance of the paint film. According to the GB/T1732-93 detection method, it is 50Hg/cm. Flexibility of smoke anti-corrosion coating: Flexibility is to maintain the smoothness of the paint film while allowing for maximum deformation of the paint film. The GB/T1732-89 testing method specifies 1mm.