High temperature vinyl ester glass flake base coating High temperature vinyl ester glass flake surface coating

Nowadays, chemical products are widely used in industrial production, bringing abundant profits to many people. But these chemical raw materials also have strong corrosion resistance. This makes many people feel headache. How can we resist the corrosion of these materials on equipment and containers?
Today's message for everyone isGlass flake adhesiveAnd glass flake coating are two types of corrosion-resistant materials. As one of the many coatings, glass flake adhesive anti-corrosion products are no longer corroded and have extended their service life after using this coating. There are still many products that maintain their original beauty and beautiful luster, and many customers prefer this new type of material that is both healthy and environmentally friendly, and give high praise to this coating.
Of course, many metal products are not easily oxidized or rusted in the air, and even if they are corroded by other media such as acid rain, they will not be corroded. This shows how effective the anti-corrosion properties of glass flake adhesive are. Some chemical materials, such as those with high temperatures, can also cause strong corrosiveness during use. Based on this, we can choose between high-temperature and medium low temperature materials for glass flake adhesive. For high-temperature applications, high-temperature vinyl glass flake adhesive should be used. For some jobs with lower temperatures, using low-temperature or medium temperature materials is sufficient.

High temperature vinyl ester glass flake base coating High temperature vinyl ester glass flake surface coating

Detailed description: High temperature vinyl ester glass flake base coating High temperature vinyl ester glass flake surface coating
1) Seamless dust-proof, easy to clean, alkali and acid resistant, mold resistant and other excellent properties
2) Color selection, beautiful and bright, fast construction (suitable for general industrial plants such as electronics factories, food factories, precision machinery factories), GMP industry plants, laboratories, shopping centers, parking lots and other ground surface coatings. ）
technical indicators
Inspection item: Component A, Component B
Color: Adjustable light yellow or transparent
Specific gravity: 1.20 ± 0.05 0.851-0.90
Proportion: Component A/Component B=4:1
Solid content: ≥ 50%
Curing schedule: 16 hours (10 ° C), 10 hours (25 ° C), 5 hours (30 ° C)
Pedestrian: 48 hours (10 ° C) 36 hours (25 ° C) 24 hours (30 ° C)
Overload: 7 days (10 ° C) 4 days (25 ° C) 2 days (30 ° C)
Available time: 2.5 hours (10 ° C) 90 minutes (25 ° C) 60 minutes (30 ° C)
Construction Instructions
Mixing: During storage, component A may have slight precipitation. Before mixing, mix component A thoroughly and pour A/B into the mixing bucket in proportion. After mixing evenly, apply glass flake adhesive for anti-corrosion construction. Instructions for using the supporting curing agent
Construction method: 1) Bottom coat: Use TPU3000 or 3009 bottom coat to achieve uniform film formation
2) Intermediate coating: Apply TPU 3073 or 3079 intermediate coating, mix quartz powder and apply to the required thickness
3) Topcoat: Roll or spray TPU3018 mixture onto the sealed intermediate coat
Reference dosage: 0.1-0.3kg/m2
Construction conditions: The moisture content should be below 8%, the relative humidity should be below 55%, and on rainy days or when the relative humidity in the atmosphere is above 85%, or when the temperature is below 10 ° C, the use of glass flake adhesive for anti-corrosion construction should be avoided
safety
This product belongs to the category of chemicals, and ingestion can be harmful or fatal. If swallowed, seek medical attention immediately. If accidentally splashed into the eyes, rinse with plenty of water. In severe cases, seek medical attention immediately. Pay attention to taking preventive measures, fire and explosion prevention, and the disposal of residues should comply with relevant or local government safety regulations.
Important note: Instructions for using the curing agent for the anti-corrosion construction of glass flake adhesive
Tangpu Company guarantees the production quality of its products. The suggestions and information provided above are sourced from our independent laboratory and are accurate under controlled conditions. However, due to our inability to directly and continuously control the use of the product, whether or not we adopt the provided suggestions, *, plans, and information, the Tangpu company department assumes all direct or indirect responsibilities arising from the use of the product. The maximum compensation for the seller and the maximum compensation liability for any claims by the buyer shall be the selling price of the product. High temperature vinyl ester glass flake base coating High temperature vinyl ester glass flake surface coating High temperature vinyl ester glass flake base coating High temperature vinyl ester glass flake surface coating

Glass flake adhesive: Summary of advantages:1The infiltration of media, gases, and water vapor is much smaller than that of ordinary fiberglass. Not easily prone to medium diffusion, it can effectively avoid physical damage such as bottom corrosion, dispersion, bubbling, and peeling.2The shrinkage rate is small during hardening. Due to the dispersed stress of glass flakes, the residual stress on each contact surface is small, and the coefficient of thermal expansion is also small, so the bonding strength will not be weakened by thermal expansion, and the thermal stability is good.3Has strong wear resistance and abrasion resistance, and is limited to local areas when encountering mechanical damage, with a small tendency to spread.4Good reparability. After a few years of use, the damaged area only needs simple handling to be repaired.5Strong adaptability to protective surfaces, especially suitable for anti-corrosion of complex surfaces.6Good construction performance. Flake anti-corrosion can be applied using various methods such as spraying, rolling, and scraping. Good overall quality and convenient on-site ingredient preparation, capable of curing at room temperature and heat curing. Application scope of glass flake adhesive: petroleum, chemical pipelines, sewage tanks, gas tanks, equipment, storage tanks, offshore oil platforms, ship berthing, power, chemical, desulfurization devices.example1Examples of smoke exhaust and desulfurization devices, absorption tower flues, accident slurry tanks, limestone slurry tanks, and machine mill recirculation slurry tanks in power plants2Examples of hydrochloric acid recovery equipment, coke oven desulfurization equipment, and acid washing equipment in steel plants3Example of Petroleum Crude Oil Storage Tanks4Examples of chlor alkali facilities, dye and chemical facilities in the chemical industry5Examples of concrete tanks and neutralization tanks for drainage and waste liquid treatment devices6: Sewage treatment plant Our company's business scope has also expanded from a single production-oriented enterprise to production+A comprehensive service-oriented enterprise. On the basis of our existing production lines for glass flake adhesive and glass flake anti-corrosion coatings, we have established an online sales department and formed our own engineering team to independently undertake glass flake anti-corrosion projects. Although our team building has achieved some success, the task has not been completed yet. Technology still needs innovation, personnel still need training, new products still need continuous research and development, and the market is changing. We should keep up with the times and explore the market. Customer satisfaction is our eternal goal. Provide * services to satisfy customers *. The company strictly adheres to the principle of establishing a business with precision and meeting the needs of users; Winning by quality, making reliable products; To treat each other with sincerity and provide high-quality service standards.

Characteristics of glass flake adhesive:

1.Glass flake adhesive has good corrosion resistance. Due to the use of high-performance vinyl resin as the matrix resin, vinyl resin has better high temperature resistance and corrosion resistance than epoxy resin.

2Low permeability, high resistance to water vapor permeability, higher than ordinary epoxy resin adhesives and coatings6-15Multiple times, compared to ordinary epoxy fiberglass reinforced plasticFRPtall4Twice.

3Has strong adhesive strength>2.0mpa, bonding strength with concrete>2.5mpaTherefore, the glass flake adhesive lining coating is not prone to cracking, delamination, delamination or peeling, and has good adhesion and impact strength, thereby ensuring good corrosion resistance.

4High temperature resistance and good heat shock resistance. The coating contains many glass flakes, which eliminates the difference in linear expansion coefficient between the coating and steel11.5x10-6/℃, which is similar between the two, allows the scale adhesive to adapt to environments with sudden temperature changes and severe corrosion, such as power systemsFGDIn some abnormal situations,FGDAt certain stages, the temperature can reach200-250At ℃, we conducted a heat shock resistance test by placing a steel plate coated with glass flake adhesive on it100℃ boiling water and0℃ ice water each1Hours, after10There were no abnormal phenomena observed after the sudden temperature change test.

6Good wear resistance, high hardness after curing, good wear resistance, glass flake adhesive is wear-resistant ，130mg（cs-17w-500gIn case of mechanical damage, the glass flake adhesive is also localized and can be repaired in a timely manner.