-
E-mail
1246535405@qq.com
-
Phone
13776388950
-
Address
1-3 Tongda Road, Jintan City
Product Categories
- Full temperature cultivation shaker
- constant temperature water tank
- CO2 oscillation incubator
- rocking bed
- Variable speed multipurpose oscillator
- Water bath constant temperature oscillator
- Magnetic stirring water bath
- High temperature oil bath oscillator
- Low temperature water tank
- Gas bath constant temperature oscillator
Jintan District Xicheng Xinrui Instrument Factory
High temperature oil bath oscillator
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The digital high-temperature oil bath oscillator is a biochemical instrument that combines a temperature controlled constant temperature water bath/oil bath with an oscillator. It is mainly suitable for oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in various universities, medical, petrochemical, health and epidemic prevention, environmental monitoring and other scientific research departments
Product Details
Digital high-temperature oil bath oscillatorKey Features:
1: Accurate numerical display of temperature control.
2: There is no splashing of waves during oscillation.
3: Equipped with mechanical timing.
4: The spring bottle rack is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments.
5: Stepless speed regulation, smooth operation, easy and safe operation.
6: The inner cavity is made of stainless steel, which has good corrosion resistance.
Digital high-temperature oil bath oscillatorMain technical performance:
1. Power supply: 220V 50Hz
2. Heating power: 2000w
3. Timing range: 0-120 minutes (or normally open)
4. Oscillation frequency: starting -300 revolutions per minute, adjustable
5. Oscillation amplitude: 20mm
6. Constant temperature range: room temperature -200 ℃, water bath is available oil bath
7. Oscillatory methods: reciprocating, swirling, and dual function (to be selected during procurement)
8: Temperature control accuracy: ± 1 ℃
9: Water tank size: 490 × 390 × 170
10: Dimensions: 700 × 550 × 490
Digital DisplayInstructions Before Use
1. Please read this manual carefully before use.
2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.
4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.
5. The speed control should start slowly from low speed to high speed.
6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.
1. Please read this manual carefully before use.
2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.
4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.
5. The speed control should start slowly from low speed to high speed.
6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.
Digital DisplayInstructions for Use
1. Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode. (For detailed settings, please refer to the following diagram)
2. Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position.
3. Turn on the power switch and set the constant temperature:
(1) Place the control switch in the 'Setting' section, and the temperature displayed on the screen will be the set temperature. Adjust the knob to set it to the desired temperature for your work. (The working temperature you set should be higher than the ambient temperature. At this point, the machine will start heating up and the yellow indicator light will be on. Otherwise, the machine will not work.)
(2) Place the small switch of the control part on the 'measurement' end, and the temperature displayed on the screen will be the actual temperature of the air inside the test chamber. As the temperature inside the chamber changes, the displayed number will also change accordingly.
(3) When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin.
4. Activate the oscillation device:
(1) Turn on the oscillation switch on the control panel, and the indicator light will turn on.
(2) Adjust the oscillation speed knob to the desired oscillation frequency.
5. Cut off the power after finishing the work and set it asideTurn the speed control knob and temperature control knob to the lowest point.
6. Clean the machine and keep it clean.
1. Load the test bottle and maintain balance. If it is a dual function model, set the oscillation mode. (For detailed settings, please refer to the following diagram)
2. Connect the power and set the timer according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position.
3. Turn on the power switch and set the constant temperature:
(1) Place the control switch in the 'Setting' section, and the temperature displayed on the screen will be the set temperature. Adjust the knob to set it to the desired temperature for your work. (The working temperature you set should be higher than the ambient temperature. At this point, the machine will start heating up and the yellow indicator light will be on. Otherwise, the machine will not work.)
(2) Place the small switch of the control part on the 'measurement' end, and the temperature displayed on the screen will be the actual temperature of the air inside the test chamber. As the temperature inside the chamber changes, the displayed number will also change accordingly.
(3) When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin.
4. Activate the oscillation device:
(1) Turn on the oscillation switch on the control panel, and the indicator light will turn on.
(2) Adjust the oscillation speed knob to the desired oscillation frequency.
5. Cut off the power after finishing the work and set it asideTurn the speed control knob and temperature control knob to the lowest point.
6. Clean the machine and keep it clean.
Jintan Chengdong Xinrui Instrument Factory is a large-scale instrument manufacturer in China.
Main products:Electric centrifugeHigh speed centrifuge;Large capacity centrifugeMagnetic stirrer; Electric constant temperature incubator; Constant temperature oscillator; Oil bath constant temperatureoscillatorSuper constant temperature water bath; Constant temperature oil bath;constant temperature water bathConstant temperature and humidityincubatorBiochemical incubator; Light incubator; Electric constant temperature incubator; Electric Blender; Constant temperature drying box; Vacuum drying oven; Salt spray corrosion test chamber; High and low temperature test chamber; Distilled water device; Test tube heater, etc
Letter, recruiting agents nationwide!
