High quality insulation aluminum foil insulation film manufacturer

High quality insulation aluminum foil insulation film manufacturer High pressure polyethylene (PEF) is a production line using foaming technology, using scientific formulas to blend various raw materials such as high-pressure polyethylene, flame retardants, foaming agents, crosslinking agents, etc. After mixing and refining, polyolefin is chemically bridged and foamed at a high rate to form a balanced foam product with a network polymer structure. It has a series of foam ratios of 20, 30, 40, and 45 (density), and has oxygen indices of 26, 28, 30, and 32 in terms of flame retardancy and flame retardancy, as well as ordinary products. The product has a very fine independent bubble structure.
Product features:
1. Good insulation effect: The foaming method of this material is independent closed cell foaming, with a thermal conductivity of only 0.038 w/m.k. It not only has good insulation effect, but also has more prominent advantages in cold insulation.
2. Easy and fast construction: During construction, directly wrap the insulation board or pipe around the object that needs to be insulated and bond it with glue.
3. Long service life: Due to its excellent weather resistance, corrosion resistance, impact resistance, and stability of material structure, its service life is higher than traditional insulation materials.
Polyethylene thermal insulation material is produced by special process. Its foam is of closed cell structure. It has the characteristics of heat insulation, moisture retention, anti condensation, anti-aging, etc., and is widely used in the heat insulation, moisture retention, cold insulation, etc. of * air conditioners and cold and hot pipes. Polyethylene insulation material is a high-performance energy-saving material. Under the same conditions, it uses less material than other materials and is easy and fast to construct. It shortens the project cycle, improves construction treatment, and enhances reliability.
Technical indicators of PEF polyethylene
Number: Technical Project Unit Standard Requirements
Length deviation mm 2060 ± 50
Width deviation mm 1040 ± 25
3 thickness deviation mm 100 ± 4
Tear strength N/cm ≥ 2
Appearance quality shall be in accordance with Q/01EST001-994.2
6 tensile strength Kp good ≥ 100
7 Dimensional stability (value)% 70 ≤ 4-25 ≥ 1
8 compression strength (25% compression) Kp good ≥ 15
9 compression deformation (25%)% ≤ 15
Thermal conductivity coefficient W/m.k ≤ 0.040
11 Oxygen Index 22-32
Remarks according to Q/01es1001-1999

There are three main ways of heat conduction: radiation, conduction, and convection.

Not only does it solve the discomfort and environmental hazards caused by glass fiber and foam materials in the past, but it can also block ultraviolet rays that penetrate through iron sheets, concrete, wood, and ordinary insulation materials and enter the room. By combining the reflective and thermal properties of aluminum plated film material with polyethylene material, it not only has good insulation, heat reflection, thermal insulation, and anti radiation functions, but also plays a good role in moisture-proof, thermal insulation, and energy saving in building applications (roofs, walls, floors) through the characteristics of this material.

High quality insulation aluminum foil insulation film manufacturer