High pressure metal wound gasket for oil pipelines

High pressure metal wound gasket for oil pipelinesClassification of spiral wound gaskets: Spiral wound gaskets are divided into basic metal wound gaskets, metal wound gaskets with inner rings, metal wound gaskets with outer rings, metal wound gaskets with inner and outer rings, and metal wound gaskets (with ribs) for heat exchangers.

High pressure metal wound gasket for oil pipelinesWhen installing valve metal wrap gaskets, we need to choose the size of the product for installation. This product has a certain degree of elasticity and plasticity, and it can generate a certain radial force under the action of compression force, making it tight to the place of use. This product has sufficient chemical properties and will not contaminate the medium during use. Additionally, the internal packing will not be swollen or dissolved by the medium, so the packing itself will not corrode the sealing surface. And when using this product, some additives need to be added to improve its performance, which can increase its service life during use. This product is relatively easy to install when in use.

High pressure metal wound gasket for oil pipelinesThere are many processes involved in making metal pads using wrapping pads. Firstly, we need to cut the product and install the blade during cutting. Then, we can adjust and fix the position of the blade holder on the scale; Using the fixed frame as the center of the circle, while stabilizing the fixed frame, it is also necessary to stabilize the tool holder and move it uniformly downwards along the direction of the blade until the cutting is completed; In fact, the fixed bracket and scale on the equipment are interlocked, so we can only confirm the machining size by using the tool holder on the scale, which is very simple to operate. When the knife holder and the fixed frame reachWhen the distance is small, the distance between the center of the circle and the blade is 2.5 centimeters, so the scale on the scale starts from 2.5 centimeters, and the size marked on the scale is the actual size after cutting.