-
E-mail
Wxjiuying@wxjyhjsb.com
-
Phone
13915282125
-
Address
Building 11, Hengfeng Petrochemical, Block B, Ganlu Industrial Park, Ehu Town, Xishan District, Wuxi City
Product Categories
Wuxi Jiuying Environmental Testing Equipment Co., Ltd
High and low temperature impact test chamber (two box type)
NegotiableUpdate on 01/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This product is suitable for safety performance testing of electronic components, providing reliability testing, product screening testing, etc. Through this equipment testing, the reliability of the product can be improved and quality control can be carried out.
Product Details
| model | GDCJ-100 | GDCJ-250 | GDCJ-500 | GDCJ-010 |
| Studio size: mm | 400X500X500 | 500X600X810 | 700X800X900 | 1000X1000X1000 |
| Dimensions: mm | 1030X1020X1470 | 1100X1120X1730 | 1260X1320X1920 | 1610X1560X1960 |
|
Main technical indicators | High temperature box range | +60℃～200℃ |
| Low temperature box range | 0℃～-70℃ | |
| temperature fluctuation | ±0.5℃ | |
| uniform temperature | ±2℃ | |
| heating rate | 5 ℃/min (average throughout the entire process) | |
| 降温速率 | 5 ℃/min (average throughout the entire process) | |
| Pre cooling lower limit temperature | -70℃ | |
| Impact temperature | +150～-60℃ | |
| Sample rack size | 150×150mm | |
| Temperature recovery time | 5min | |
| Sample rack conversion time | 10s | |
| Impact method | Up and down moving basket or flip type | |
| power supply | 380V±10 ﹪ 50HZ | |
| Cold and hot exchange | thermal insulation material | Glass fiber cotton/rigid polyurethane foam |
| air circulation | Single cycle, extended shaft, stainless steel centrifugal fan blades | |
| compressor | French "Taikang" fully enclosed refrigeration compressor | |
| cooler | Multi stage membrane evaporator | |
| Cooling method | Unit cooling method/Dual (stacked) cooling method |
Product Usage:
This product is suitable for safety performance testing of electronic components, providing reliability testing, product screening testing, etc. Through this equipment testing, the reliability of the product can be improved and quality control can be carried out.
Product Features:
1. The test sample will automatically guide the temperature shock in the pre cooling zone, room temperature, and preheating zone when it is stationary.
The testing range is from 2.60 degrees Celsius to minus 10 degrees Celsius.
3. The temperature conversion time for cold and hot shock is within 8 seconds, and the recovery time is within 5 minutes
