Hebei anti fishing grille cleaning machine

Hebei anti fishing grille cleaning machinefeature

1. The toothed rake moves downwards behind the grid and upwards in front of it to scoop up debris, without bringing the debris underwater.

2. When there is a large amount of sediment (mud, sand, gravel) at the bottom, it will not block the rake and avoid accidents.

3. The action program is reliable and has a low failure rate.

4. After the whole machine is debugged, it leaves the factory and is easy to install.

5. During maintenance, the grille can rotate around the water pivot to come out of the water surface, making maintenance convenient.

Hebei anti fishing grille cleaning machineMain structure and working principle:
The grille cleaning machine consists of a frame, sprocket, traction chain, transmission system, and toothed rake combination
A、 Tooth rake combination
B、 Composed of underwater guide wheel assembly, underwater secondary grille, grille bar and other components
1. Main structure
(1) The grille body has an integral structure and is assembled and debugged on the factory platform. It can only be shipped after 8 hours of empty machine trial operation to ensure assembly quality and greatly simplify on-site installation workload The structural design ensures that the equipment will not bend under the condition of a water level difference of 1M between the front and rear of the grille
Damage and deformation The rack side panels are made of 10mm thick steel plates, and the side panels are connected by welded channel steel formed by bending steel plates
(2) This machine adds a movable sub grid in front of the main grid, with a distance of * from the main grid. The slag of the movable sub grid is picked up by long rake teeth, effectively preventing the slag in the sewage from passing through the bottom of the grid and the dirt at the bottom
The accumulation of stagnation
(3) The chain adopts a specially designed wide chain plate stainless steel chain, with a safety factor of not less than 6, and is equipped with a chain
Wheel tension adjustment device When operating in the chain groove, there is no need to add other slag blocking devices, which can effectively prevent slag from entangling in the chain groove and avoid jamming
(4) The transmission mechanism is installed on the top of the frame and adopts a horizontal cycloidal pinwheel reducer. It is equipped with an over torque protection device (shear pin), which can effectively prevent damage to the motor reducer caused by overload And equipped with a protective cover, easy to disassemble and assemble, with a delicate and beautiful appearance
(5) The cleaning rake teeth come in two forms, one is a long rake and the other is a short rake The long rake has a large amount of slag, while the short rake has a clean rake
(6) This machine is equipped with an electrical overload protection device, which will automatically shut down and issue an alarm when the machinery fails or is overloaded. The system operates sensitively and reliably