Hastelloy HC diaphragm single flange pressure transmitter DN50

Hastelloy HC diaphragm single flange pressure transmitter DN50It has the characteristics of design principles, complete variety and specifications, and easy installation and use. Has strong universality and substitutability. In order to adapt to the continuous improvement and development of domestic automation level, this series of products not only has a compact and exquisite design, but also introduces intelligent functions with HART fieldbus protocol.
Hastelloy HC diaphragm single flange pressure transmitter DN50Main technical parameters:
Output: 4-20mA
Power supply: 24VDC; No load, the transmitter can operate at 12VDC; Great 45VDC
Accuracy: ± 0.2%, ± 0.25%, ± 0.5% of the calibration range, including comprehensive errors of linearity, variability, and repeatability.
Temperature range: The amplifier operates at -29 ℃ -+93 ℃; Sensitive components operate at -40 ℃ -+104 ℃;
Storage temperature: -50 ℃ -+120 ℃;
Relative humidity: 0-85%;
Positive and negative transfer: Regardless of the output, after positive and negative transfer, the upper and lower limits of the range must not exceed the limit of the range. The large negative transfer is 600% of the small calibration range, and the large positive transfer is 500% of the small calibration range.
Strengths Analysis
Simple structure: without any movable or elastic components, therefore reliable and requires minimal maintenance.
Easy installation: The built-in structure particularly demonstrates this feature, requiring no tools.
Easy adjustment: The zero position and range potentiometers can be used to freely shift the zero position or change the range within the effective range of liquid level detection, and the two adjustments do not affect each other.
Widely applicable; Suitable for liquid level measurement in media with high temperature, high pressure, strong corrosion, etc.
Order Model Specification Table

Ordering Notice

1) The transmitter model can be determined according to the selection specification table as needed.
2) The numbers and symbols in the selection specification table must be filled in clearly and accurately.
3) If there is positive or negative migration, the migration amount value must be indicated.
4) If a differential pressure transmitter needs to be equipped with a three valve group, it needs to be specified separately.
5) When selecting a remote transmitter, it should also be determined according to different remote flange selection tables as needed.
6) If the remote transmitter is to be used in vacuum and high temperature environments, it should be specially marked when ordering.
7) The materials for the contact medium O-ring include nitrile rubber and fluororubber.
8) Unless otherwise specified, the filling fluid at the factory is silicone oil