Hana PH electrode HI1131B

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Italian Hana pH analyzer has multiple electrode options, and the Hana pH electrode HI1131B can be used for routine laboratory pH detection, beer detection, etc. Hana pH calibration solution, electrode preservation solution, electrode cleaning solution, electrode filling solution, etc. are all available for sale, and can be inquired for specific pH tester models. Distilled water or deionized water should not be used for storing or soaking electrodes, as this will cause electrode sensor failure. Once the electrode sensor fails, it cannot be restored and requires the purchase of additional electrodes.

Product Details

HanaPHelectrodeHI1131B

Hana, ItalyHI1131BFillable single dialysis membrane glass composite aciditypHelectrode,Suitable for routine laboratory, beer and other sample measurements,When using a new electrode, the top protective cover should be removed first and the entire electrode should be inspected. If salt crystals are formed in the electrode tip and protective cover due to the evaporation of electrolyte inside the electrode through the dialysis membrane, it does not affect the normal use of the electrode, indicating that the electrode dialysis membrane is normal. Rinse it off with clean water. During transportation, bubbles may form inside the glass ball of the electrode head. In this case, gently shake the electrode like a common mercury thermometer to remove the bubbles. If the electrode glass induction membrane or dialysis membrane head is relatively dry, the electrode can be soaked inHI70300At least in the electrode preservation solution1One hour to keep the dry glass sensing membrane and dialysis membrane moist; Frequent soaking is beneficial for electrodes.

HanaPHelectrodeHI1131BTechnical Specifications

Product Name	HI1131BFillable single dialysis membrane glass composite aciditypHelectrode
Scope of application	Suitable for routine laboratory, beer and other sample measurements
measurement range	0 to13pH
sensor type	Spherical shape【Ø9.5mm】
Sample Temperature	0 to100°C（32to212 °F）
Electrode characteristics	Single reference comparison【Ag/AgCl】Single ceramic dialysis membrane【15-20 μL/h】
Type of filling fluid	3.5 M KCI【 Recommended 】HI7082】
pressure	0.1bar
interface type	BNC
cable length	1Rice noodles are long
electrode material	High-temperature glass body-HT
electrode size	120mm ×Ø12mm

Electrode preservation solution cleaning solution

哈纳PH电极HI1131B

HI70300Customized specialized electrode preservation solution
Specifications:20 mL × 4；120 mLThe230 mLThe500 mL
Electrode preservation solution ensures aciditypHElectrode and oxidation-reductionORPAn important aspect of electrode performance.

Specially formulated with high-purity chemical reagents and high-quality deionized water, rigorously certified with various measuring tools and containers, carefully formulated in a temperature and humidity environment that meets the requirements, and traceableNISTStandard reference material（SRM）；

HannaBrand electrode preservation solution, formulated with a special formula to minimize bacterial growth on the electrode, adopts tamper proof sealing settings to ensure the quality and freshness of the electrode preservation solution,

If the acidity electrode glass sensing membrane or dialysis membrane head is found to be dry, the electrode should be soaked inHI70300At least in the electrode preservation solution1More than an hour.
aciditypHElectrode and oxidation-reductionORPAfter use, the electrode must be cleaned with a specialized electrode cleaning solution. For the cleaned electrode, it should be filled withHI70300Electrode preservation solutionHI740200The electrode protection kit is installed on the electrode sensor to ensure that the electrode sensor is immersed in the electrode preservation solution.

哈纳PH电极HI1131B

After using the electrode, it is necessary to immediately use a specialized cleaning solution, which is the key to ensuring the service life and response time of the electrode. According to the different samples being measured, the corresponding electrode cleaning solution should be selected:
●HI7061Universal electrode cleaning solution

Specifications:20 mL × 25；120 mLThe230 mLThe500 mL
The electrode is soaked in conventional electrode cleaning solution for about30Minute, can dissolve mineral residues and other common attachments
●HI7073Protein electrode cleaning solution

Specifications:230 mLThe500 mL
The electrode is soaked in protein electrode cleaning solution for about15Minutes, effectively dissolving protein residues
●HI7074Inorganic electrode cleaning solution

Specifications:230 mLThe500 mL
The electrode is immersed in inorganic electrode cleaning solution for about15Minutes, effectively removing residues at the dialysis membrane site to prevent membrane blockage
●HI7077Oil electrode cleaning solution

Specifications:230 mLThe500 mL
To clean oil or grease attachments, it is necessary to use the correct chemicals to dissolve them and ensure that the electrodes are not affected

More water quality testing instruments,PH/ORPMeasuring instrumentphFor products such as electrodes, please feel free to inquire with sales personnel for more information.

After sales service commitment

1.All products are covered by a one-year warranty from the date of sale, except for consumables, in the event of non-human damage.

2.If there are any malfunctions or component damages caused by quality issues during the warranty period, our company is responsible for repairing them.

3.If there are quality problems outside the warranty period, or if the instrument components are damaged due to usage or other human factors, our company will only charge the cost of the replaced components.

4.Our company provides24Free hourly consultation and maintenance services, with a response time of4If the maintenance personnel are unable to troubleshoot the product through telephone communication, the buyer shall send the product back for maintenance, and our company shall be responsible for the postage incurred.