HY-B2 digital cyclotron oscillator

HY-B2 digital cyclotron oscillatorIt is a new product carefully designed by technical personnel based on the opinions of a large number of users. Widely used in laboratories of various colleges and universities, environmental protection, scientific research, health, epidemic prevention, petroleum, chemical and other units, it has the characteristics of generous appearance, large capacity, low noise, light weight, small volume, adjustable speed, and timing device, making it an ideal and essential tool for laboratory staff.

Performance of HY-B2 Digital Cyclotron Oscillator
1: Power supply: AC 220V 50Hz
2: Motor power: 60W
3: Stepless speed regulation: 0-300 times/minute (digital display)
4: Oscillation amplitude: 20mm cyclotron
5: Timing: 120 minutes

How to use HY-B2 digital cyclotron oscillator
1: Firstly, place the container (bottle) that needs to be oscillated into the oscillation plate spring. The solution in the container cannot exceed one-third of the container, otherwise it must be plugged.
2: Check the timer knob and turn it to the ON position or the time position you need to specify.
3: Turn the speed control knob counterclockwise to the speed position, turn on the power switch, the power indicator light will turn on, and then turn the speed control knob clockwise to the speed you need.

Notes on HY-B2 Digital Cyclotron Oscillator
1: This machine adopts a three eye safety socket, and the grounding wire must be properly connected when using it.
2: When working, the machine should be placed on a flat and sturdy tabletop to prevent vibration.
3: The clamp spring is only used for fixing small and medium-sized bottles, and for extra large containers, several springs should be removed or reinforced in other ways.
4: After using this machine, the power should be turned off, placed in a dry and ventilated place, and kept clean.