German Fischer FISCHER coating thickness gauge

German Fischer FISCHER MPO dual-purpose coating thickness gauge

Fischer GmbH in Germany has been dedicated to the research and production of coating equipment for over 60 years

Pocket sized appearance, easy, fast, and non-destructive to measure coating thickness on almost all metals

● Enjoy conductivity compensation technology

China has after-sales service centers that provide worry free repairs

MPO dual-purpose coating thickness gauge product introduction

The German Fischer MPO coating thickness gauge is an economical instrument that can accurately and conveniently display the thickness reading of the coating on two LCD displays.

Adopting a dual function built-in probe, there is no need to replace the probe, and it can automatically identify iron-based or non-ferrous materials and select the corresponding measurement method for precise measurement.

The instrument can set upper and lower limits. When the measurement result exceeds the values that meet the upper and lower limits, the instrument will emit a corresponding sound or flash a light to indicate.

● Convenient to carry and accurate measurement data. The measurable products are as follows:

The thickness of electroplated coatings such as copper, chromium, zinc, or coatings on steel materials, as well as paints, coatings, and ceramic lamp coatings.

Coating thickness on non-ferrous metal materials such as aluminum, copper, magnesium, zinc, etc.

The thickness of the anodic oxide film on aluminum and magnesium materials.

Product Specifications

Range: 0-2000 μ m.

● 精 度： ±1μm（0～50μm）； ±2%（50μm～1000μm）； ±3%(1000μm～2000μm)。

Repetition accuracy: ± 0.5 μ m (0-100 μ m); ± 0.5% (>100 μ m).

● Small measurement of curvature diameter: within the accuracy range, iron-based diameter is 35mm and non-ferrous diameter is 50mm; Under the condition of allowable error<10%, it can reach a diameter of 10mm for iron-based materials and 2mm for non-ferrous materials.

Small measurement area diameter: φ 4mm (under the condition of allowable error<10%, it can reach φ 2mm).

Small substrate thickness: 0.2mm for iron-based materials (with an error of less than 10%); Non iron based 0.09mm (with an error of less than 10%).

Weight: 60g (excluding battery).

● Dimensions: 64mm × 30m × 85mm.

● Power supply: Two No. 5 batteries

Standard Configuration
Host, aluminum based test block, iron-based test block, diaphragm, instruction manual, certificate of conformity, instrument box