Fuel oil hydrogen sulfide tester ASTM D7621 ISO 8217

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YG-3011 hydrogen sulfide analyzer for fuel oil can quickly test the concentration of hydrogen sulfide in fuel oil. YG type instruments include A amp; amp; B testing method. Product Introduction: The instrument is designed and manufactured in accordance with the requirements of ASTM IP testing standards. A small amount of sample is diluted with diluent and heated to 60 ℃ in a metal bath under precise temperature control to release H2S from the sample. Clean air is used as the carrier gas to transport H2S to the measuring cell of an electrochemical sensor, where the instantaneous concentration of H2S is measured. The air flow rate is measured and controlled by a digital mass flow meter. When H2S is present in the sample

Product Details

YG-3011Fuel oil hydrogen sulfide tester，Can be quickly testedThe concentration of hydrogen sulfide in fuel oil. YG type instruments include A&B testing methods.

Product Introduction

Fuel oil hydrogen sulfide tester*Design and manufacture according to the requirements of ASTM IP testing standards, dilute trace amounts of samples with diluents, and heat them in a metal bath under precise temperature control60℃, remove the sampleH₂SRelease it, use clean air as the carrier gas, andH₂SLoad into the measuring cell of the electrochemical sensor and measureH₂SThe real-time concentration and air flow rate are measured and controlled by a digital mass flow meter when in the sampleH₂S*After release, the instrument will automatically calculateH₂SAccumulated concentration.

meet the standardsASTM D7621 ISO 8217 IP 570

Fuel oil hydrogen sulfide testerTechnical Specifications:

Measuring range0-250mg/kg H₂S
Operating Temperature5-40℃，RH80%
Viscosity range: up to3000mm2/s
Detection method: automatic (electrochemical sensor)
Test time:15 minute
sample product Quantity:1ml, 2ml, 5ml(according toH₂SConcentration determination)
Dilution dose:20ml
Voltage: 220V50Hz。
Electricity consumption: 300 w
Computer interface:RS-232
Size: 580X350X280mm