Free Calcium Oxide Analyzer, Free Calcium Rapid Analyzer

Free Calcium Oxide Analyzer, Free Calcium Rapid AnalyzerInstructions for using the instrument:
This instrument has two functions: automatic and manual, and does not require complex installation. It is easy to operate and convenient to use. The instructions for use are as follows:
1. When using this instrument, it should be placed flat.
2. Before placing the conical flask, first push the movable rod upwards by hand, then place the conical flask on the furnace plate, and slowly move downwards by hand. The condenser tube should be connected to the conical flask.

3. The water in the bucket should reach three-quarters of about 1500ml (place the bucket in the instrument, add water to the bucket, first use a screwdriver to unscrew the screw, open the upper back cover of the instrument, add water to the bucket, and then install the back cover).
4. After turning on the power, if you want to preheat, stir, and cool first, you can directly press the [Heat] button, [Stir] button, and [Cool] button. If you want to switch to automatic mode, you need to set the running time first, and then press the [Start/Stop] button.

Free Calcium Oxide Analyzer, Free Calcium Rapid AnalyzerMaintenance:
1: The instrument should have a good grounding device when in use.
2: The instrument cannot be heated without load for a long time.
3: When the instrument is not in use for a long time, the power plug should be unplugged.
4: The motor should not rotate at too high a speed; This motor has a dead point. When encountering it, use a pointed object to rotate the motor once.
Comparison of energy consumption between single sample determination technology and glycerol method