Exhaust ozone concentration detector

NegotiableUpdate on 01/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The exhaust ozone concentration detector is mainly used to detect a small amount of residual ozone concentration in exhaust gas, with a range of 0-100ppm. The 0-1000ppm system uses ultraviolet lamps as the light source, with a service life of more than 20000 hours, stable measurement data, and high accuracy. The ozone concentration detector is designed based on the Beer Lambert law, utilizing the characteristic absorption of ultraviolet light by ozone and the microprocessor control technology of *.

Product Details

Exhaust ozone concentration detectorProduct Features
Measurement principle: According to the Beer Lambert law
Testing method: Dual path ultraviolet absorption method, with high measurement accuracy;
Light source system: Long life ultraviolet lamp tube (wavelength 253.7nm)
Light cell system: Separated light cell technology, leak free, high pressure resistance
Resistant to high flow sampling gas impact;
Intelligent compensation: built-in light source automatic compensation function;
Automatic zeroing: The equipment automatically zeros once every 3 hours to ensure the stability of the zero point and the accuracy of the detected concentration.
Data display: Devin 3.5-inch touch screen, easy for users to operate
Output function: 4-20mA current signal, RS485 communication
Warranty period: Three years
Exhaust ozone concentration detectorProduct Parameters:
Range: 0-100ppm, 0-1000ppm

Concentration unit: ppm

Display resolution: 0.1
Accuracy: ± 3%
Output mode: Differential 4-20mA (linear) RS485
Input gas flow rate: 1.0L ± 0.2L/min
Input gas pressure:<0.1MPa
Power supply: AC 220V ± 10% 50Hz
Installation size: H: 120 L: 260 W: 206mm
Gas inlet and outlet pipe diameter: inner diameter 4mm, outer diameter 6mm PTFE tube