-
E-mail
ZGJSV@qq.com
-
Phone
13817077663
-
Address
488 Luyuan Road, Jiading District, Shanghai
Shanghai Jiangsen Electric Valve Factory Co., Ltd
ZGJSV@qq.com
13817077663
488 Luyuan Road, Jiading District, Shanghai
Thermal oil electric temperature regulating valve, hot water self operated electric temperature regulating valve
1Thermal oil electric temperature regulating valve, hot water self operated electric temperature regulating valve Overview
Hot water self operated electric control temperature regulating valve(Suitable for larger diameters and thermal oil control), this valve's largest feature only requires ordinary operation220VPower supply, utilizing the energy of the regulated medium itself, directly adjusts and controls the temperature of media such as steam, hot gas, hot oil, and gas, and can also be used to prevent overheating or heat exchange,The valve has a simple structure,easy to operate,Choose a wide temperature range, fast response time, and reliable sealing performance,And it can be adjusted freely during operation,Therefore, it is widely used for hot water supply in sectors such as chemical, petroleum, food, textile, hotels and restaurants.
IIHot water self operated electric control temperature regulating valve Product Features
The nominal diameter of this series of products is20to200mmThe nominal pressure is1.0、1.6、4.0The6.4MPaThe temperature range for use is determined by-20℃~350℃Accept the signal as0~10mA. DCor4~20mA. DCTo change the flow rate of the regulated medium and maintain the controlled process parameters at the given values, the single seat regulating type is suitable for situations where the pressure difference is small, the medium viscosity is high, or there are slight particle impurities. Sleeve adjustable type is suitable for situations with large pressure difference
IIIHot water self operated electric control temperature regulating valve Main component materials
Valve body and valve cover:HT200TheZG230-450TheZG1Cr18Ni9Ti
Valve core:ZG1Cr18Ni9TiSi Tai Lai alloy overlay welding enhances polytetrafluoroethylene
Packing: polytetrafluoroethylene, flexible graphite
Push rod and liner:2Cr13
Gasket: Rubber asbestos board10The1Cr18Ni9TiAsbestos wrapped gasket
Bellows:1Cr18Ni9Ti
4Hot water self operated electric control temperature regulating valve Connection standards
Connection size and standard
Flange standard: Cast iron flange according toGB4216-84Cast iron flange according toGB9113-88
Flange sealing surface type:PN10ThePN16For convex surfaces
PN40ThePN64The valve body is concave and convex
Structural length:GB12221-89
Jacket insulation type jacket heat carrier interface: butt weldingφ18×4
The distance between the valve body flange and the flange end face can be manufactured according to the standard used. asANSITheJISTheDINWaiting for standards
5Hot water self operated electric control temperature regulating valveMain technical parameters
Nominal DiameterDN(mm) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
||||
(10) |
(12) |
(15) |
(20) |
||||||||||||
Rated flow coefficient |
Direct level |
1.8 |
2.8 |
4.4 |
6.9 |
11 |
17.6 |
27.5 |
44 |
69 |
110 |
176 |
275 |
440 |
690 |
equal percentage |
1.6 |
2.5 |
4 |
6.3 |
10 |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
|
rated stroke(mm) |
16 |
25 |
40 |
60 |
|||||||||||
Nominal PressurePN(MPa) |
1.0 1.6 4.0 6.4 |
||||||||||||||
Inherent flow characteristics |
Straight line, equal percentage |
||||||||||||||
Inherent adjustable ratio |
50 |
||||||||||||||
Allowable leakage amount |
single seat |
Hard seal:IVlevel Soft seal:VIlevel |
|||||||||||||
sleeve |
Hard seal:IIlevel Soft seal:VIlevel |
||||||||||||||
Operating Temperaturet(℃) |
-20~200 -40~250 -40~450 -60~450 |
||||||||||||||
Signal range(mA.DC) |
0~10 4~20 |
||||||||||||||
mode of action |
Electric switch type Electric open type |
||||||||||||||
Environmental temperature for use(℃) |
Electric control valve:-20~70℃ |
||||||||||||||
Environmental humidity for use |
Electric control valve:≤95% |
||||||||||||||
power supply voltage |
220V 50Hz |
||||||||||||||
The performance indicators of this product are implementedGB/T4213-92. Technical parameters related to supporting electric actuators
Nominal DiameterDN(mm) |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|
Electric actuator mechanism |
普通型 |
ZAZ-60 |
ZAZ-60 |
DKZ-410 |
DKZ-410 |
|||||||
Electronic type |
JHZAZ1 |
JHZAZ1 |
JHZAZ3 |
JHZAZ3 |
||||||||
Electric actuator thrust(N) |
普通型 |
400 |
400 |
6400 |
6400 |
|||||||
Electronic type |
2000 |
4000 |
6000 |
8000 |
||||||||
普通型 |
12.5 |
20 |
32 |
48 |
||||||||
|
Electronic type |
30 |
30 |
48 |
60 |
|||||||
Power consumption(N) |
普通型 |
28 |
35 |
|||||||||
Electronic type |
6 |
15 |
25 |
40 |
||||||||
The data in the table is for regular configuration only, and the specific selection depends on the main parameters and user requirements.
VIHot water self operated electric control temperature regulating valveAllow pressure difference
Single seat adjustable type allowable differential pressure gauge UnitMPa
Nominal Diameter |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
200 |
|||
10 |
12 |
15 |
20 |
|||||||||||
400 |
3.90 |
2.71 |
1.73 |
0.95 |
0.62 |
0.37 |
0.24 |
0.15 |
|
|
|
|
|
|
2000 |
6.40 |
6.40 |
6.40 |
4.87 |
3.11 |
|
|
|
|
|
|
|
|
|
4000 |
6.40 |
6.40 |
6.40 |
6.40 |
6.11 |
3.73 |
2.39 |
1.53 |
|
|
|
|
|
|
6000 |
|
|
|
|
|
|
|
|
1.38 |
0.91 |
0.54 |
|
|
|
6400 |
|
|
|
|
|
|
|
|
1.45 |
0.95 |
0.61 |
0.40 |
0.28 |
0.15 |
8000 |
|
|
|
|
|
|
|
|
|
|
|
0.50 |
0.34 |
0.19 |
16000 |
|
|
|
|
|
|
|
|
|
|
0.98 |
0.68 |
0 |
|