EATON overflow valve KCG3250DZMUH11

EATON overflow valve KCG3250DZMUH11

Pressure bar (ps i) for petroleum based hydraulic oil and ordinary flame retardant fluid 210 (3000) 5% -95% oil in water emulsion A large controllable flow rate of 140 (2000) flow/pressure data *, L/min (US gpm)， FN-03... 38 (10) E FN-06.76 (20) E FN-10.189 (50) has good regulating performance and can control small flow hydraulic oil. All models can use hydraulic oil, water in oil emulsion, and water ethylene glycol. When using phosphate esters (non alkyl), the model label should be prefixed with "F3". The E FN-06 and 10 models can also use a water solution of 5-10% concentration soluble oil.
The working viscosity range of * is from 13 to 860 cS t (70 to 4000 S US), but the working range of * is from 13 to 54 cS t (70 to 245 S US) (excluding water in oil soluble oil emulsions).
For further information on the oil, please refer to sample 920.
Temperature restricted environment below 210 bar (3000 ps i) 19/17/14 -20 ˇ C (-4 ˇ F)+40 ˇ C (+104 ˇ F) oil temperature petroleum based oil aqueous solution 20 ˇ C (-4 ˇ F)+80 ˇ C (+176 ˇ F)+10 ˇ C (+50 ˇ F)+54 ˇ C (+130 ˇ F)
The pollution control methods required for pollution control and the selection of products for controlling oil working conditions are included in Vickers publication 9132 or 561 "Vickers System Pollution Control Guidelines". The book also includes information on Wiggers' concept of "proactive maintenance".
The product in the sample has a grade of *:
Under the conditions of μ m, 5 μ m, and 15 μ m. For the following * values, they are based on the ISO cleanliness level of 2 *. In order to achieve the service life of the oil and hydraulic system, the temperature is usually C (150 F). For synthetic oil, please consult the manufacturer or Vickers. The limitations of this type of oil exceed the range specified in the "Hydraulic Oil" section for petroleum based viscosity assurance.

EATON overflow valve KCG3250DZMUH11