Direct sales of gas source distributor

Direct sales of gas source distributorAdvantages:
1. The air source distributor adopts an imported three in one air-water separator, which integrates pressure reduction, oil-water separation, and automatic drainage to ensure the stability and cleanliness of the instrument air source.
2. The air source distributor adopts stainless ball valves to extend its service life.
3. All instrument pipelines of the air source distributor are made of imported plug-in components, with a high pressure resistance of up to 1MPa.
4. The air source distributor is easy to install, convenient to use, and basically maintenance free.
Direct sales of gas source distributorInstallation and maintenance instructions:
1. The installation of the air source distributor can be horizontally placed on the floor or at the corner of the wall according to the site conditions, or it can be installed by hanging on the wall.
2. The installation of the gas distribution box can be done in a wall mounted manner.
3. The inlet pipe of the air source adopts a Φ 14X2 stainless steel pipe, welded connection, and the outlet pipe adopts an 8X1 or 10X1 stainless steel pipe, connected by a sleeve. The sleeve or joint should be purchased from an imported instrument joint to prevent air leakage. The connection method of a special ball valve should be used for maintenance: the filter element of the imported oil-water separator should be replaced regularly.

KFQ-I, KFQ-II, and KFQ-III gas source distributors are mainly used for centralized management and distribution of gases. If combined with filters, pure gas sources can be connected to instruments and meters for use. Its main applications are in industries such as power, petrochemicals, papermaking, metallurgy, and automated assembly lines. The air source distributor can be placed horizontally on the floor or in the corner of a wall according to the site conditions, or it can be installed on the wall. The air distribution box of the device can be equipped with a wall mounted device. The intake pipe of the gas source is connected by threads, welded connection, and flange connection. The exhaust pipe is generally made of 8X1 or 10X1 stainless steel pipe, or flexible hoses such as PU pipe and nylon pipe can be used. Stainless steel pipes are connected using a sleeve type connection, and hoses are connected using a quick twist and quick insert form. Each outlet pipe is controlled by a separate valve to prevent air leakage. If welding is used, please contact our company in advance. We use a special ball valve connection method for maintenance: regularly replace the filter element and drain the inlet oil-water separator.​