Digital mold incubator

1、 Product Introduction:

MPX-250 Digital Mold IncubatorIt is a high-precision constant temperature equipment with cold and heat control. It is a constant temperature cultivation device for bacteria, molds, microorganisms, breeding, and experiments. It is particularly suitable for scientific research and production in fields such as biotechnology, medical research, environmental protection, agriculture and forestry science, aquaculture, and animal husbandry.

2、 MPX-250 Digital Mold IncubatorThe main characteristics are:

1. The insulation material of the box is polyurethane foam plastic, which has strong resistance to external heat (cold) sources.

2. The refrigeration system adopts * refrigeration technology, with good refrigeration effect.

3. The all glass box door facilitates observation of the working chamber.

4. To protect the refrigeration compressor, the control circuit is designed with power-off protection and delay function.

5. Automatic temperature control, using a red LFD display to show clear and intuitive numbers.

6. Indoor lighting, allowing observation of the culture inside the box（Mold incubator equipped with UV sterilization system）.

7. The inner liner is made of all stainless steel with semi-circular corners and corrosion.

III MPX-250Technical parameters:

1、 Model: MPX-250

2、 Capacity: 250L

3、 Temperature control range: 5 ℃~50 ℃

4、 Environmental temperature: 5 ℃~35 ℃

5、 Temperature resolution: 0.1 ℃

6、 Temperature uniformity: ± 1 ℃

7、 Temperature fluctuation: ± 1 ℃

8、 Power: 800W

9、 Power supply: 220V 50Hz

4 MPX-250Usage method:

1. Connect the power supply, insert the three pin plug into the power socket, and set the power switch on the panel to the "on" position. At this time, the instrument will display a number, indicating that the device has entered the working state.

2. Set '-Set the "measurement" switch to "setting", adjust the temperature control knob or touch key, and observe the digital thermometer reading to obtain the desired set temperature valueSet the-Set the "measurement" switch to "measurement", and the equipment will enter the automatic temperature control working state. The three indicator lights of heating, cooling, and protection alternate to indicate the working status of the equipment.

3. The lighting switch should be set to the "on" position when lighting is required.

4. When sterilizing the mold incubator, turn on the sterilization light switch.

5. Intelligent and special requirements require separate user manuals.

5 MPX-250Precautions for:

1After the device lands, if the ground is uneven, it should be leveled with a cushion.

2The movement of the equipment should be parallel, and the inclination angle in any direction should be less than45Degree.

3When this device is operating normally, the placement of the contents inside the box should not affect air circulation to ensure uniform temperature inside the box.

4The inner lining of the box wall and the surface of the equipment should be wiped regularly to maintain cleanliness.

5. If the device is not in use, the power cord should be disconnected to prevent the device from being charged and causing injury. And it should be operated regularly (usually quarterly) according to the usage conditions2-3Tian, to expel moisture from electrical components and avoid damaging related devices.

6If this device malfunctions, it should be repaired and resolved by professionals or manufacturers.

Jintan Weicheng Experimental Equipment FactoryDedicated to serving you wholeheartedly

：

：jsjtwc

More product displays: www.jtwc17.com

Note: Special specifications and requirements can be customized,