Digital Oscilloscope

Capture high-frequency random burrs. At 5 µ s/div-50 s/div, all channels can be automatically set with one click for vertical, horizontal, and trigger systems, and the automatic setting operation can be undone. On all time base settings, use acquisition hardware to capture spikes with the narrowest 12 ns typical values.^{Signal type automatic setting menu options}

Sampling - Only sample data. Square wave with single period, multiple periods, rising or falling edge

Average sine wave single cycle, multi cycle, FFT spectrum

The average waveform can be selected from 4, 16, 64, and 128.

Single capture-

Use the Single Sequence button to capture one triggered acquisition sequence at a time.

Rolling mode-

On all acquisition time base settings above 100 ms/div.

trigger system

Trigger mode - automatic trigger, normal trigger, single capture trigger.

Trigger Type

Edge rising edge/falling edge-

Traditional triggering driven by voltage levels. Positive or negative slope on any channel. Coupling selection: AC, DC, noise suppression, HF suppression, LF suppression.

Video-

Trigger all lines or individual lines, synthesize odd/even fields or all fields in the video, or broadcast formats NTSC, PAL, SECAM.

Pulse width or burrs-

Trigger a selectable time limit between 33 ns and 10 s that is less than, greater than, equal to, or not equal to.

trigger source

2-channel model

CH1, CH2, Ext, Ext/5, AC line.

4-channel model

CH1, CH2, CH3, CH4, Ext, Ext/5, AC line.

Trigger View

When the trigger view button is pressed, a trigger signal is displayed.

Trigger signal frequency reading

Provide frequency readings of the trigger source.

cursor

Type - amplitude, time. Measure - [Δ] T, 1 [Δ] T frequency, [Δ] V.

Video NTSC, PAL, SECAM fields: all fields, odd or even fields; Row: All rows or selectable number of rows

Automatic waveform measurement

Cycle, frequency,+width, - width, rise time, fall time, maximum value, minimum value, peak to peak, intermediate value, cycle RMS.

Waveform mathematical operation

Operators - add, subtract, multiply, FFT. FFT -

Window, Hanning, flat top, rectangular, 2048 samples.

Calculation source

2-channel models: CH1 to CH2, CH2 to CH1, CH1+CH2, CH1xCH2. 4-channel models: CH1 to CH2, CH2 to CH1, CH3 to CH4, CH4 to CH3, CH1+CH2, CH3+CH4, CH1xCH2, CH3xCH4.

Auto Range

Automatically adjust the vertical and/or horizontal oscilloscope settings when moving the probe point-to-point or when the signal shows significant changes.

Display characteristics

Monitor-

Color model: 1/4 VGA passive color LCD, with various colors on a black background, and adjustable multi-level contrast. Monochrome model: 1/4 VGA backlight passive LDC, with adjustable multi-level contrast, and the ability to select videos from the front panel in reverse. Interpolation - Sinx/x. Display type - dot, vector. Afterglow - Off, 1 s, 2 s, 5 s, infinity. Format - YT and XY.

Environment and safety

Temperature-

Working temperature: 0 ℃ to+50 ℃. Non working temperature: -40 ℃ to+71 ℃.

Humidity-

Working humidity and non working humidity: 80% relative humidity at or below+40 ℃. Working humidity and non working humidity: up to 45% relative humidity at 50 ℃.

Height-

Working height and non working height: The maximum height is 3000 meters.

Electromagnetic compatibility capability-

Comply with 89/336/EEC regulations and 93/68/EEC amendments, and meet or exceed EN55011 Class A radiation and conducted radiation; FCC 47 CFR, Part 15, Subpart B, Class A; Australian EMC architecture, demonstrated according to AS/NZS 2064 radiation standard; Russian GOST EMC regulations.

Security-

UL610100-1:2003, CSA22.2 NO. 61010-1:2003, EN61010-1:2001, IEC61010-1:2001。