Deodorization equipment online H2S monitor iTrans 2

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The deodorization equipment online H2S monitoring device iTrans 2 can be remotely diagnosed, set, or calibrated by superimposing high-frequency current on the industrial standard 4-20mA r n analog circuit when using the optional HART communication protocol

Product Details

Deodorization equipment online H2S monitor iTrans 2

reliable

Microprocessor controlled transmitters can operate independently or perform multi-point system configuration. When equipped with optional onboard relays, the monitor also has the ability to work independently, activate alarms, horns, or fans, and automatically shut down the system without the need to connect to the * controller.

measurement range

flammable gas	0-100% LEL， Resolution 1%
Methane (Vol)	0-100% Vol， Resolution 1%
hydrogen	0-999 ppm， Resolution 1 ppm
oxygen	0-30% Vol， Resolution 0.1%
ammonia	0-200 ppm， Resolution 1 ppm
carbon monoxide	0-999 ppm， Resolution 1 ppm
hydrogen sulfide	0-500 ppm， Resolution 1 ppm
sulfur dioxide	0.2-99.9 ppm， Resolution 0.1 ppm
hydrogen cyanide	0.2-30 ppm， Resolution 0.1 ppm
	0.2-30 ppm， Resolution 0.1 ppm
phosphine	0-1 ppm， Resolution 0.01 ppm
nitrogen dioxide	0.2-99.9 ppm， Resolution 0.1 ppm
nitric oxide	0-999 ppm， Resolution 1 ppm
	0.2-99.9 ppm， Resolution 0.1 ppm
	0.02-1 ppm， Resolution 0.01 ppm
carbon dioxide	0-100% Vol， Resolution 1%
carbon dioxide	0-0.5% Vol， Resolution 0.01%
carbon dioxide	0-5% Vol， Resolution 0.01%

universal

By utilizing its * features and options, iTrans 2 can be configured to meet almost all application requirements.

■	explosion-proof
■	HART (optional)
■	RS-485 Modbus (optional)
■	Stainless steel casing (optional)
■	Programmable relay (optional)
■	Installation of 3-wire and 4-wire systems
■	Dual gas detection (optional)
■	Remote detection (optional)
■	Support various sensors - electrochemical, catalytic combustion, and infrared

Deodorization equipment online H2S monitor iTrans 2

Features and advantages

Dual gas detection	On some models, iTrans 2 can detect and display up to two gases. Two gas sensors can be directly installed on the transmitter, or one of the gas sensors can be remotely installed
Support various sensors	ITrans 2 supports electrochemical, catalytic bead, and infrared sensors. In addition, iTrans 2 can also be used for the most common industrial gases, achieving standardization of your gas detection equipment
Smart Sensor	The intelligent sensors of iTrans 2 are calibrated before leaving the factory and can automatically send sensor information, such as sensor lifespan, to the transmitter. Immediately display the sensor service life indicator after each calibration
Dual channel split screen LED display screen	It also has visibility in places with weak light
Non open lid calibration	The non open interface of iTrans 2 uses simple magnetic rod operation, allowing for configuration and calibration of all transmitters without opening the explosion-proof casing of the device.
Programmable relay	The microprocessor controlled transmitter can operate independently or perform multi-point system configuration. With optional onboard relays, the monitor also has the ability to work independently, activate alarms, horns, or fans, and shut down the system without the need to connect back to the * controller.
Multiple wiring options	By configuring accordingly, iTrans 2 can meet almost all installation application requirements. Common configurations include: 3-wire system (4-20mA) model, can fully utilize ITrans features and options, and can be used with all iTrans sensors. The 4-wire (digital ModBus) model can fully utilize the functions and options of iTrans 2 and can be used with all iTrans 2 sensors
HARTTM communication protocol	In the case of using the optional HART communication protocol, iTrans 2 can operate within the industry standard range of 4-20mA Simulate the method of superimposing high-frequency current on the circuit for remote diagnosis, setting or calibration
stainless steel casing	Optional stainless steel casing for corrosive environments.