Deodorization equipment fixed ammonia ITRANS 2

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The deodorization equipment is fixed with ammonia ITRANS 2, and the intelligent sensor is calibrated before leaving the factory. The sensor information, such as sensor service life, can be automatically sent to the transmitter

Product Details

Deodorization equipment fixed ammonia ITRANS 2

Technical Specifications

sensor	Combustible gases: catalytic, infrared
	Toxic gases/oxygen: electrochemical, infrared (CO2)
material	Shell: Epoxy resin coated aluminum or 316 stainless steel
display	The dual channel split screen LED display screen (arranged with 4 bits and 7 segments per channel) can provide simultaneous display of one or two gases.
input voltage	12-28VDC working range (typical 24VDC)
power consumption	150mA@24VDC (Electrochemical sensor)
	175mA@24VDC (Combustible gas, catalytic), 0.8A peak (one gas)
	160mA@24VDC (Combustible gas, infrared), 0.6A peak value
	265mA@24VDC (Catalytic/infrared combination), 1.2A peak (two gases)
Protection level	NEMA 4X, IP66
humidity range	10-90% RH (non condensing), typical
temperature range	-40°C ~ +75°C
Size	127 x 153 x 129 mm / 2.9 Kg
cable	3-core or 4-core
output signal	Standard: 4-20mA (source)
	Optional: RS-485 Modbus (9600 baud)
	Optional: HART protocol
Alarm relay (can Select)	3 alarms relay (5 Amps at 30VDC)	Two user programmable relays, SPSDT， Normally Open
		A faulty relay, SPST， normally closed
certification	NRTL/c , CSA	Class I, Div 1, Groups B, C, D AEx d IIB + H2 T5 (1)
		Class I, Div 2, Groups A, B, C, D AEx d IIB + H2 T5 (2)
	China Explosion proof GYB13.1323X - Ex d IIC T6 Gb

Deodorization equipment fixed ammonia ITRANS 2

Features and advantages

Dual gas detection	On some models, iTrans 2 can detect and display up to two gases. Two gas sensors can be directly installed on the transmitter, or one of the gas sensors can be remotely installed
Support various sensors	ITrans 2 supports electrochemical, catalytic bead, and infrared sensors. In addition, iTrans 2 can also be used for the most common industrial gases, achieving standardization of your gas detection equipment
Smart Sensor	The intelligent sensors of iTrans 2 are calibrated before leaving the factory and can automatically send sensor information, such as sensor lifespan, to the transmitter. Immediately display the sensor service life indicator after each calibration
Dual channel split screen LED display screen	It also has visibility in places with weak light
Non open lid calibration	The non open interface of iTrans 2 uses simple magnetic rod operation, allowing for configuration and calibration of all transmitters without opening the explosion-proof casing of the device.
Programmable relay	The microprocessor controlled transmitter can operate independently or perform multi-point system configuration. With optional onboard relays, the monitor also has the ability to work independently, activate alarms, horns, or fans, and shut down the system without the need to connect back to the * controller.
Multiple wiring options	By configuring accordingly, iTrans 2 can meet almost all installation application requirements. Common configurations include: 3-wire system (4-20mA) model, can fully utilize ITrans features and options, and can be used with all iTrans sensors. The 4-wire (digital ModBus) model can fully utilize the functions and options of iTrans 2 and can be used with all iTrans 2 sensors
HARTTM communication protocol	In the case of using the optional HART communication protocol, iTrans 2 can operate within the industry standard range of 4-20mA Simulate the method of superimposing high-frequency current on the circuit for remote diagnosis, setting or calibration
stainless steel casing	Optional stainless steel casing for corrosive environments.