DRK201 Shore Hardness Tester

Product details

Product Features

The sampler has a beautiful appearance, compact and reasonable structure, easy operation, and convenient use.

Product Application

The rubber Shore hardness tester is used to determine the hardness of vulcanized rubber and plastic products. The hardness tester head is installed on the bench for convenient and accurate measurement. The hardness tester head can also be removed and measured on the production site.

technical standard

Place the sample on a sturdy surfaceHold the hardness tester and place the indenter at least 12mm away from the edge of the specimen. Press the indenter foot firmly onto the specimen, ensuring that the indenter is pressed vertically into the specimen until the indenter foot contacts the specimen and the reading is taken within 1 second Measure the hardness value 5 times at different locations at least 6mm apart from the measuring points, and take the average value (for microporous materials, the measuring points should be at least 15mm apart) To stabilize the measurement conditions and improve the measurement accuracy, the hardness tester device should be measured on the same type of measuring rack produced in conjunction Meets the requirements of standards such as GB/T531 "Test Method for Shore Hardness of Vulcanized Rubber" and GB2411 "Test Method for Shore Hardness of Plastics".

Product Parameters

Product Configuration

One host, one certificate of conformity, and one instruction manual