Product Categories

Shanghai Huibin Instrument Co., Ltd

E-mail
13310000820@163.com
Phone
13310000820
Address
Room 1108, Building 6, Lane 158, Baoxiang Road, Jiading District, Shanghai

Contact Now

DIAS Infrared Thermometer DPE10MF for Flame Temperature Measurement

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DIAS flame infrared thermometer DPE10MF, DIAS infrared low-temperature short wave infrared thermometer, 50 #176; C~1000 #176; C , 75 #176; C~1200 #176; C , 250 #176; C~1500 #176; C , 500 #176; C~2500 #176; C , Wavelength 3.9 μ m, response time 1.5 ms, application areas: flame measurement, rotary kiln, combustion gas measurement, glass industry, non-ferrous metals

Product Details

DIAS infrared thermometer DPE10MF, DPE10MFV for flame temperature measurement

Product detailed description

Main features

Digital infrared thermometer with a temperature range of 50 ° C~2500 ° C

Kuai response time of 1.5 ms

Communication interface RS485

• Digital display and operation buttons

Variable focal length with aiming light or lens for aiming

DIAS infrared thermometer DPE10MF, DPE10MFV for flame temperature measurement

Typical application areas:

• Through flame measurement

• Rotary kiln

• Measurement through combustion gases

• Glass industry

• Non ferrous metals

DIAS infrared thermometer DPE10MF, DPE10MFV for flame temperature measurement

technical performance

Model number	DPE10MF
Temperature measurement range	50°C~1000°C / 75°C~1200°C / 250°C~1500°C / 500°C~2500°C
Sub temperature measurement range	Adjustable within temperature range, with a small span of 50 ° C
spectral range	3.9μm
optical lens	Variable focal length
Distance coefficient ratio	See the table
measurement error	0.3% measurement value+1 K (TU= 23°C, ε = 1, t95= 1s)
repeatability accuracy	0.1% measurement value+1 K (TU= 23°C, ε = 1, t95= 1)
NETD	0.1°C (TU= 23°C, ε = 1, t95= 1s)
Response time (t)95)	1.5 ms, Adjustable up to 10 seconds
emissivity	0.100~1.000, can be adjusted directly through the interface or temperature measurement button
storage method	Large value storage, adjustable through interface
output signal	0/4~20 mA, Adjustable through software, temperature linear, high load 500
communication interface	RS485, Electrical isolation, half duplex, large 115 kBd
sighting system	LED or laser aiming light or lens aiming
software	PYROSOFT Spot
adjustable parameters	Emissivity, response time, temperature unit ° C or ° F, storage method
adjustable parameters	The sub temperature measurement range can be adjusted through interfaces and software
User Control	Emissivity adjustment button (resolution 0.001), aiming light button, digital display
power supply	24 V DC ± 25 %
Supply and consumption	Big 6 W
Operating temperature	0°C ~55°C
Storage temperature	–20°C~70°C
weight	Approximately 520 grams
size	54 × 54 mm, length 170 mm
shell	Compact casing with plug, monitor, buttons, and optical protective window
Protection level	IP 65 (DIN 40 050)
CE Certification	Compliant with EU regulations (EN 50 011)
Scope of Supply	PYROSPOT DPE 10MF, Operation manual, inspection checklist
Scope of Supply	Windows. PYROSOFT Spot software (no connecting cable, please order separately)

Attachments: Electrical Accessories, Optical Accessories, Mechanical Accessories

12 pin connecting cable	Length 2 m, 5 m, 10 m, 15 m, 20 m, 25 m or 30 m
communication interface	RS485~USB
power supply	24 V DC, 1 A
mounting bracket	Adjustable, stainless steel
Ball shaped installation bracket	Adjustable, stainless steel
Air blower	Stainless steel, air pressure 0.1~0.5 bar, oil-free, optional with protective cover
water cooling plate	Additional device or with air blower
water cooling jacket	stainless steel
Protect the window	Including air blower
Other attachments can be customized

Optical coefficient

Variable focal length	I	II	III
measure distancea(mm)	130~150	230~380	360~800
Model and temperature range	Measure the diameter of the light spotM(mm)
DPE 10MF (50~1000°C)	1.2~2.0	1.9~3.9	3.3~9.0
DPE 10MF (75~1200°C)	1.0~1.1	1.7~3.0	3.1~8.7
DPE 10MF (250~1500°C)	0.7~0.8	1.4~2.2	2.8~8.3
DPE 10MF (500~2500°C)	0.7~0.8	1.4~2.2	2.8~8.3
Aperture D (mm)	11.6	11.6	11.6

attachment

110Series infrared thermometer accessories

2、Installation combination of mechanical installation accessories for 10 series infrared thermometers

software

1、Infrared thermometer software PYROLOFT SPOT

2、Infrared thermometer software PYROLOFT SPOT Pro

Handheld programmer

German DIAS infrared thermometer handheld programmer DHP1040

List of all infrared thermometers used for flame temperature measurement by DIAS Germany:

1. High precision infrared thermometer DPE10MF for measuring object temperature through flames (50~2500 ° C, segmented)

2. Infrared thermometer DT40F (300-2500 ° C, segmented) for measuring object temperature through flames

3. Infrared thermometer DT44F (300-2500 ° C, segmented) for measuring object temperature through flames

4. Infrared thermometer DA44F (50~2500 ° C, segmented) for measuring object temperature through flames

Other infrared thermometers for measuring flame temperature

1. Clean the infrared thermometer DT40C for flame temperature measurement

2. High precision cleaning flame temperature measurement with infrared thermometer DPE10C

3. Infrared thermometer DSR10NF for flame temperature measurement with particles

4. Flame thermometer with particles DSR54NF infrared thermometer

Infrared thermal imaging device for measuring temperature through flames

Infrared thermal imaging instrument PYROVIEW 640F using flame temperature measurement imaging

Integrated system of infrared thermal imaging instrument for kiln through flame temperature measurement imaging

Integrated system of kiln infrared thermal imaging instrument PYRONINC 640F

Infrared thermal imaging instrument for measuring flame temperature and imaging with particles

Flame Temperature Measurement Imaging - Infrared Thermal Imager PYROVIEW 640C