Crack depth detector

NegotiableUpdate on 02/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The depth measurement principle of ZT-205 crack depth detector: $r $n vibration energy propagates inside the concrete. When passing through the crack, the vibration energy diffracts at the crack endpoint, and the diffraction angle has a geometric relationship with the crack depth. The crack depth gauge is used to achieve high-precision depth measurement of cracks based on the geometric relationship between diffraction angle and depth.

Product Details

ZT-205Crack depth detector

Application scope:

The crack depth gauge is used to measure the depth of cracks on the surface of concrete.

According to the standard:

Technical Specification for Ultrasonic Testing of Concrete Defects CECS21:2000

ZT-205Crack depth detectorProduct Features:

Easy to operate: Chinese menu, test upon startup, simple buttons to complete the test.

Intuitive results: No need to measure wave velocity, no need to calculate, directly display crack depth.

Data processing: The data can be transmitted to a PC for quick printing of detection data.

ZT-205Technical Specifications:

1. Crack depth testing range: ≤ 500mm

2. Test error ≤ 5mm or 5%~10% of actual seam depth

3. Test data storage capacity: 25000 test data

4. Data transmission interface: USB

5. Power supply: rechargeable battery, with a power supply time of up to 50 hours

6. Host volume: 220 * 162 * 91mm

Comparison of crack depth detection methods:

Test steps	test parameters	Ultrasonic flat measurement method	Crack depth gauge
1. Non cross seam testing	Sound velocity measurement	When measuring sound at L=100, 150, 200, 250, 300mm..., calculate the sound velocity	No need
2. Cross seam testing	When there is a sound of crossing the seam	Measure the sound when crossing the gap L '=100, 150, 200, 250, 300mm	Measure the diffraction wave vibration signals of L '=0, 5, 10, 15, 20mm
3. The results show that	Crack depth calculation	According to the formula, use a computer indoors to select data and calculate depth	No calculation required, crack depth displayed directly on site
The testing surface requires		Seamless and cracked areas with a length of no less than 300mm are required for testing	No need for seamless zone
Need to test length		L and L 'should be at least 300mm	L '=1.5 times the depth of the crack
Requirements for testing personnel		Instrument operators and data processors require basic professional and computer knowledge	General technicians can operate independently by referring to the instruction manual

Standard configuration:

serial number	name	unit	quantity	remark
1	host	Taiwan	1	/
2	support	a	1	/
3	connecting wire	root	1	/
4	Certificate of Conformity	Zhang	1	/
5	Warranty Card	Zhang	1	/
6	software CD	Zhang	1	/
11	instrument case	a	1	/