Controllable Environment Box

Place of Origin:

America

Instrument Introduction:

The front and top panels of the white polypropylene sealed cabin are made of transparent polypropylene material for easy observation. The environmental box has two doors: a smaller side door

Used to place samples without disturbing the internal environment as much as possible, the large front door comes with foldable chloroprene rubber gloves for placing large equipment.

There is a hole with an inner diameter of 1-1/2 inches on the left panel for the conduit to enter the box.

The dehumidification pump sucks in air inside the box through a drying column, circulates it, and then discharges it into the box. The improved ultrasonic humidifier can hold up to 1.3 gallons of water.

The built-in 500 watt heater can quickly raise the temperature to the set point. The cooling system uses liquid carbon dioxide (not equipped).

The control panel has dual LCD displays. The upper display screen shows the temperature setting value and current reading. The lower display screen shows the humidity setting value and

Current reading. Models that can only control humidity have only one display screen. The detachable control module facilitates maintenance and calibration.

The perforated aluminum plate inside the box is equipped with a fan and heater. The fan maintains air circulation inside the box to maintain uniform humidity and temperature levels. built-in